Handmade 1x12 speaker cab (#53). Solid Salvaged Elm (best guess) from a very old antique table. Wraparound top handle hand shaped from salvaged walnut. This cab has a sibling 1x12 in my personal shop, (see bio for link)
- Unloaded/No Speaker
- Primarily a 12" cab, but can be converted to a 10" cab when purchased with baffle converter (message me if you want a converter installed for free prior to shipment)
- Wood Type: Salvaged Elm (best guess based on grain pattern, hardness, etc).
- 3/4" Plywood Baffle (bolted and glued into cab, grill cloth is mounted on separate, thinner and removable baffle)
- Wraparound hand shaped walnut handle.
- Grill Cloth: Oxblood silver stripe
- Speaker Bolts included. Rear mounted, back panels removable for speaker install. You can use all 8 bolts or only 4.
- Pre-wired (red = positive), just toss a speaker in and go.
- Dimensions (inches): h17, 19(with handle)/d11/w17, 19(handle with handle)
- Weight: 20lbs
- Finished with water based gloss poly
- Shop policy: All speaker cabs ship via UPS to physical addresses only. No exceptions (apart from local pickup of course- message me if you are local).
