**********THIS is an actual pics********
**********THIS is an actual pics********
**********THIS is an actual pics********
handmade in Spain
handmade in Spain
Guitarras EsteveThe heritage of tradition
- The guitar’s top is prepared first, receiving its intricate wooden rosette and its bracing. Next the top is glued to the neck blank. The body rims are carefully bent and fit to the neck heel, before they are glued to the solid wood top (spruce or cedar).
- Then the rims are glued to the bottom block. The linings, which help hold the top and back in place, are glued to the inside of the rims.
- Next the cross braces for the back are glued to the rims, and the back is glued on. The body is held in its shape by a body form, while the glue is setting. Depending on the model, the rims and backs of our instruments use either high-quality veneers or top grade solid woods.
- Once our special glue has cured, the top and/or back receive their decorative binding. The fingerboard is glued into place next, before the neck, the headstock and the fingerboard receive their final shapes.
- The correct bridge height is then determined and the bridge is glued to the top, before the frets are installed into the fretboard. Finally, the guitar receives the exquisite finish ESTEVE guitars are known for.
9CB spec
Top: Solid Cedar (Thuja Plicata)
Back and sides: Solid Indian Rosewood (Dalbergia latifolia)
Neck: Samanguila (Khaya ivorensis )reinforced with Ebony
Fingerboard: Ebony (Diospyros Crassiflora Hiern)
Body: 484mm X 369mm X 105mm
Nut: 53mm
Scale: 655mm
Soundhold: 89mm
Finish: Polyurethane