Restored Pioneer A-X5 Integrated Amplifier
34 capacitors replaced. Power supply capacitors 5,600uf 42 volt (Qty. 2) Upgraded to 6,800uf 50 volts replacements All switches and potentiometers Cleaned and lubricated. Entire unit cleaned inside and out Tested for over 40 hours Restored November 2022
*****Shipping UPS Ground only No meet ups or P.O. Boxes*****
Power output: 30 watts per channel into 8Ω (stereo) Frequency response: 10Hz to 60kHz Total harmonic distortion: 0.1% Damping factor: 30 Input sensitivity: 1mV (mic), 2.5mV (MM), 150mV (line) Signal to noise ratio: 71dB (MM), 97dB (line) Output: 150mV (line) Speaker load impedance: 6Ω to 16Ω Dimensions: 320 x 98 x 230mm Weight: 4.2kg Year: 1982
****More in depth specifications listed below*****
Continuous Average Power Output 30 watts per channel min. into 8Ω
from 20Hz — 20,000Hz
with no more than 0.1 % THD Continuous Power Output at 1kHz
(both channels driven), THD 1%, 8Ω
35 watts per channelTotal Harmonic Distortion
(20Hz — 20,000Hz, 8Ω, from AUX) Continuous rated output
20 watts per channel output No more than 0.1%
No more than 0.1%Damping Factor (1kHz, 8Ω) 30 Input
(Sensitivity/Impedance) PHONO
TUNER, AUX, TAPE PLAY, ADAPTOR IN
MIC2.5mV/50kΩ
150mV/50kΩ
1mV/15kΩOutput Level TAPE REC
SPEAKER150mV
6—16ΩFrequency Response PHONO (RIAA Equalization)
TUNER, AUX, TAPE PLAY, ADAPTOR20Hz — 20,000Hz ±0.3dB
10Hz — 60,000Hz ± 2dBHum and Noise
(IHF, short circuited A network) PHONO
TUNER, AUX, TAPE PLAY71dB
97dBHum and Noise
(DIN, continuous power/50mW) PHONO
TUNER, AUX, TAPE PLAY, ADAPTOR IN68dB/61dB
85dB/62dB
Reverb Buyer Protection
Reverb has your back if your item is lost, damaged, or doesn't match its description. Simply report any issues within 7 days and we'll help you get a full refund.Learn more about Reverb Buyer Protection.
Listed | a year ago |
Condition | Good (Used) Good condition items function properly but may exhibit some wear and tear.Learn more |
Brand | |
Model |
|
Categories |