Grit your teeth and hold on! DOD Boneshaker is a straight-pipe, hard-tail run down a dirty, choppy road.
Designed in collaboration with Black Arts Toneworks, the Boneshaker is a dirty boost coupled with a powerful 3-band semi-parametric EQ. The Boneshaker can smack the front-end your amp into overdrive, or sculpt the tone of your fuzz to stand out in a mix. If your already dirty amp channel needs a little bit of a goose and you want full control over every frequency, the Boneshaker is just the ticket.
FEATURES
- Circuit design by legendary Black Arts Toneworks Pedal Guru Mark Wentz
- Versatile 3 Band Parametric EQ for expressive tone shaping
- True Bypass and with crisp blue LED status indicator
CONTROLS
- Distortion Control: This control is used to adjust the amount of distorion being applied to your signal. Turn this clockwise to increase the distortion.
- Depth Control: The control increases/decreases the overall low frequency “growl” of extended range instruments.
- Level Control: This control is used to adjust the overall volume level of the distortion effect.
- Low Control: This selects the boost or cut of the low frequency (set by the Low Frequency Control).
- Low Frequency: This control is used to the select the low frequency center.
- Mid Control: This selects the boost or cut of the mid frequency (set by the Mid Frequency Control).
- Mid Frequency: This control is used to the select the mid frequency center.
- High Control: This selects the boost or cut of the high frequency (set by the High Frequency Control).
- High Frequency: This control is used to the select the high frequency center.
- Footswitch: Press to turn the effect on or off.
SPECIFICATIONS
General Specifications
- INPUT: 1 x ¼” instrument
- OUTPUT: 1 x ¼” instrument
- CHASSIS MATERIAL: All Metal
- POWER SUPPLY: 9V Alkaline Dry Battery or Optional Power Supply
Dimensions
- HEIGHT: 2.25” (5.71 cm)
- WIDTH: 2.63” (6.68 cm)
- LENGTH: 4.68” (11.88 cm)
- WEIGHT: 1.0 lbs. (0.453 kg.)
