HIGHLIGHTS

• Active killswitch and auto stutter pedal with manual and Burst modes
• From precise signal cuts to tremolo like rhythmic stutters
• Immediate, tactile response under foot or by hand
• Three modes with adjustable Burst speed and polarity options
• All new active circuit with redesigned performance architecture
• Handmade in the USA
• All metal enclosure with premium hardware throughout
• Romeo Red finish with classic Telegraph styling
• Bi colour LED indicates speed and operational status
• CopperSound Smart Bypass with momentary or latching control
• Active analogue signal path with powered Burst circuit
• Side mounted input, output and CTRL jacks
• Limited lifetime manufacturer warranty

DESCRIPTION

The CopperSound Pedals Telegraph V2 in Romeo Red is a fully evolved killswitch and auto stutter pedal designed for modern guitar and bass rigs, as well as synth and studio setups. It delivers precise manual signal cuts alongside an automated Burst mode that creates tremolo like rhythmic slicing at adjustable speeds.

Kill mode provides instant signal mute for sharp staccato effects. Activate mode allows audio to pass only while the footswitch is pressed. Burst mode introduces an automatic stutter adjustable from around 110 BPM to extremely fast rates, with latching or momentary control via CopperSound Smart Bypass.

A side mounted Polarity switch assigns Burst to either Kill or Activate behaviour, allowing rapid cuts into your signal or controlled bursts from silence. Expression pedal support (5K to 10K via TRS) and CV clock sync enable external speed control and tempo matching to a DAW or click.

The redesigned active circuit powers the automated stutter while true bypass preserves your tone when disengaged. In the event of power loss, the pedal continues to operate passively as a standard killswitch. Built in an all metal enclosure and finished in Romeo Red, the Telegraph V2 is a durable, performance ready rhythmic tool.

CONTROLS

• MODE TOGGLE: Select Kill, Burst or Activate modes
• BURST SPEED: Adjust automatic stutter rate, LED indicates tempo
• BURST POLARITY: Set Burst to Activate or Kill behaviour
• FOOTSWITCH: Tap for latching, hold for momentary operation
• CTRL INPUT: Connect expression pedal or CV clock source
• CTRL SELECTOR: Choose CV or expression before connection
• INTERNAL DIP SWITCH: Configure latching preference and CTRL assignment

COMPONENTS AND TECHNICAL SPECIFICATIONS

• Redesigned active analogue circuit
• True bypass switching
• CopperSound Smart Bypass system
• Supports 5K to 10K TRS expression pedals
• CV clock sync via 1/4 inch instrument cable
• Fail safe passive operation on power loss
• All metal enclosure and hardware
• Side mounted input, output and CTRL jacks
• 2.1 mm centre negative 9V DC input
• Powered by standard 9V centre negative supply (not included)
• Battery operation not supported
• Current draw measured with Truetone 1Spot mA Meter:
• Bypass: Approximately 33 mA
• Engaged (maximum): Approximately 79 mA

Current draw may vary slightly depending on control settings, circuit behaviour, and active features such as gain stages, modulation, filtering, or reverb tails. For best performance, use a high quality isolated power supply that matches the pedal’s current requirements. Always refer to the manufacturer’s recommendations, as incorrect powering may cause damage.

ENCLOSURE DIMENSIONS

• Depth: 120 mm / 4.7 in
• Width: 65 mm / 2.5 in
• Height: 39 mm / 1.5 in

WEIGHT

• 423 g
• 0.93 lbs

OFFICIAL UK DEALERS

FX Pedal Planet Limited and FX Pedal Planet Online Store proudly serve as official UK dealers for (Insert Manufacturer) products. If we do not have the specific (Insert Manufacturer) product you are looking for, please reach out to us via the contacts page, and will order it on our next stock order for you at the best price and customer service.