The Yamaha Trans Acoustic guitar recreates an incredible experience without needing any external amplification or effects, just the guitar itself. With built-in reverb and chorus at your fingertips, it's the most inspiring, engaging acoustic guitar you'll ever play.

Actuator

An actuator installed on the inner surface of the guitar back vibrates in response to the vibrations of the strings. The vibrations of the actuator are then conveyed to the body of the guitar and to the air in and around the guitar body, generating authentic reverb and chorus sounds from inside the body.

Simple Controls

Three simple knobs let you adjust the amount of effects and the line out volume level. Keeping the controls small minimizes the area of the holes in the body material, which reduces acoustic sound loss.

(A) Chorus Control

(B) Reverb Control (Room/Hall)

(C) TA Switch/Line Out Volume Control

* Pressing the TA Switch for longer than 0.3 seconds activates the TA function.

* When a cable is connected to the line out jack, the line out volume can be adjusted by rotating knob (C).

Battery Box

The battery box is integrated into the end-pin jack, which requires fewer holes in the body, thus reducing acoustic sound loss. Connect the cable from the jack to a PA or amp to use as an acoustic-electric guitar.

BrandYamahaColorBlackTop Material TypeSpruceBody MaterialMahoganyBack Material TypeMahoganyNeck Material TypeMahoganyHand OrientationRightGuitar Bridge SystemFixedNumber of Strings6
About this item

• Amazing sounding reverb and chorus built into the Guitar with no need for external amplification or effects
• An actuator installed on the inner surface of the guitar back vibrates in response to the vibrations of the strings
• Three simple knobs let you adjust your amount of effects and the line out volume level
• The Guitar Body is based on Yamaha FG820, with a solid Spruce top with Mahogany back and sides
• SYSTEM70 Trans Acoustic Preamp with a SRT Piezo Pickup