Up
for auction is a precision CNCd, unfinished replacement or project
guitar body. This
body has a unique, sandblasted finish. This body was configured to
expose the heavy Ash grain, and then painted with flourescent orange and
completed with an open pore gloss poly finish
Body Wood................ Ash
Bridge Compatibility.... This body will fit either an Original Floyd Rose (OFR) or a Gotoh Floyd Rose (GE1996T)
Important bridge information- - The
bushing holes are predrilled for OFR style stud bushings (10mm
diameter). A Gotoh type Floyd Rose comes with 11mm bushings. We can
open up the holes to accept the 11mm Gotoh bushings, but you must
message us immediately after purchasing if you need the bushing holes
opened up. If we do not get a message from you, the body will ship with 10mm holes.
If you are unsure which bridge you want to use, or forget to message us
to open up the bushing holes to accept wider, Gotoh bushings, the Gotoh
Floyd Rose will function properly if used with 10mm OFR style
bushings. The Stewmac Part # for the 10mm OFR style Studs and bushings
is #2155
- The use of 32 or 33mm sustain blocks will be
required. The stock, 42mm sustain blocks can technically work, however
they will stick out of the back of the guitar and you will not be able
to use the spring cavity cover.
- The
use of any other bridge other than an Original Floyd Rose or Gotoh
Floyd Rose will likely require modifications by a qualified technician
to work.
Pick
Up Configuration..... Hum, Single, Single (direct mounted configuration- no pickguard required)
Output Jack................. 7/8" Side Mount Output Jack
Neck Pocket................Standard,
2 3/16" width (nominal dimension), 6 string Fender Strat specs.
(compatible with Strat style 21/22 fret, 25.5" scale necks. ). Please note that to
ensure you have
a snug fit with your neck and to ensure plenty of adjustment space for
height setup parameters, we purposely cut our neck pockets to the tight and shallow side of
tolerance, meaning if you have a neck in the middle to wide side of heel width tolerance,
simple neck pocket adjustments may be required.
This is a feature to ensure an optimized fit of your neck.
If you do not have the resources to do simple neck pocket modifications, you should
consult with a qualified technician before attempting to assemble your
own guitar.
Weight......................... 5 lbs 8 oz
All wiring holes are predrilled. Control cavity and pickup cavities have been shielded.
No control holes are drilled to allow for customization. Selector switch is cut.
Includes
complimentary cavity covers (either clear or matte black). The body
will default ship with clear covers. If you would prefer black
covers, you must message us immediately after ordering. If we do not get
a message that you would prefer black covers, it will ship with
clear covers.
Perle Guitars is proud to offer 100% USA made guitars from all American supplies and wood.
Bid with confidence! The body you see in the auction is the body you will receive!
The name Fender and corresponding model letters are registered trademarks of FMIC Ltd.
Perle Guitars is not affiliated with Fender and presents these terms for fitment purposes only.