The Palmer PEBUFF is a Buffer and Booster for electrical instruments. Amplifying the guitar signal before it goes to the input of a tube amplifier opens a whole world of new sounds. The device can also be used as a cable driver for longer distances or larger pedalboard setups. - Dimensions (L x W x H): 120 x 100 x 61 mm - Voltage range: 9-20 V AC or DC, 9 V PP3 battery - Max.power take-up: 10 mA - Frequency response: 20 Hz - 10 kHz - Distortion: 0.5% (1 kHz) - Impedance, Input D: 1 MOhm - Impedance, Input S: 4 MOhm - Impedance, Output: 150 Ohm - Signal-to-noise ratio: -60 dB - Max. level: 5 V - Max. gain: 13 dB
The Palmer PEBUFF is a Buffer and Booster for electrical instruments. Amplifying the guitar signal before it goes to the input of a tube amplifier opens a whole world of new sounds. The device can also be used as a cable driver for longer distances or larger pedalboard setups. - Dimensions (L x W x H): 120 x 100 x 61 mm - Voltage range: 9-20 V AC or DC, 9 V PP3 battery - Max.power take-up: 10 mA - Frequency response: 20 Hz - 10 kHz - Distortion: 0.5% (1 kHz) - Impedance, Input D: 1 MOhm - Impedance, Input S: 4 MOhm - Impedance, Output: 150 Ohm - Signal-to-noise ratio: -60 dB - Max. level: 5 V - Max. gain: 13 dB