Komet 60 designed by the legendary Ken Fischer! Serial Number #237 Komet 60 hand point to point wired guitar amplifier head Red with White V and Silver control panel.Clean bill of health given by Mike Kennedy of Komet last September. Rarely used Early serial number. New tubes.
Specs From Komet Website Designed by Ken Fischer in 1999, the Komet® 60 is the ultimate tonal chameleon. This multifaceted amplifier has the ability to operate on several different tube types; the stock EL34 factory setup immediately dials you into the benchmark English era of rock and roll, but switch to 6L6s and you’re in the 1960’s American rock zone. EL34s, KT77s, 6L6s, 5881s, KT66s or 7581s - your power tube choice ultimately decides where you wish the sound to take you. Complex harmonics, bold and clean focused clarity, with plenty of aggression when pushed.
A high cut control operates within the power section of the amplifier to allow players to darken and shape the overall tone of the amplifier without affecting the equalization of the preamp section. This solves the common problem of the loss of gain and clarity when turning the treble control down in the preamp (a session player’s dream!).
The Touch Response switch allows a choice between a fast, or a gradual response to one’s picking dynamics and guitar’s volume control settings. Players who prefer clean tones can run the full range of dynamics without breaking into unwanted distortion—you choose the response and feel you want, making this amplifier capable of playing every style of music.
Bias your amplifier's power tubes in a snap. All you will need is a digitable volt meter with a mV (milli volt) setting. The Komet® 60, HD and Concorde all have convenient bias ports on the back panel, designed for swift bias settings. These bias ports are operated in conjunction with the bias control dial located just above on the chassis.
The bias control dial is a precision, 10-turn dial with a scale from 1 to 10. A brake lever locks your setting in place. The bias control system allows the user to easily set the amplifier's bias between different sets of power tubes, and precisely dial in the power tube's bias with a digital volt meter.
50 / 60 Watts RMS (depending on power tubes)
- 1 - GZ34/5AR4 rectifier
- 2 - EL34 power tubes (operates also on 5881, 6L6, 6CA7, KT66, KT77, KT88, 6550 power tubes)
- 3 - 12AX7 pre amp tubes
- Fast / Gradual switch
- Military grade 2 Watt potentiometers: Volume, Treble, Middle, Bass, Presence, Hi Cut
- 4/8/16 - Ohm selection, two parallel outputs
- Adjustable bias pot with bias ports on back
- Custom designed transformers made in the U.S.A.
- Internally hand wired and meticulously assembled with the finest of components
- Silver tinned Teflon wire - hand wired onto glass epoxy tag board
- (audiophile grade) ceramic, gold plated tube socket pins on silver plated sockets made by Azuma
- All switches made by NKK
- 1/8th" laser cut & welded aircraft grade aluminum welded chassis made here in Louisiana
- Components assembled and mounted with stainless steel screws, bolts, washers and nuts
- Head Format: 22.5" x 9" x 9" - made from Baltic birch ply - made in the U.S.A.
- Black or Silver aluminum control panels available
- Levant style tolex (custom order color options available)