JBL CBT1000 High-Output 2-Way Line Array Column with Adjustable Vertical Coverage - WHITE

The JBL CBT1000 represents the next-generation in pattern control consistency utilizing adjustable vertical coverage and a tapered horizontal waveguide to increase the versatility of aiming the coverage of the loudspeaker to more accurately map to the room geometry in a wide variety of listening spaces. It features asymmetrical vertical coverage which sends more sound toward far area of room to make front-to-back sound levels more consistent.

• Two-piece swivel (pan)/tilt wall bracket

• Asymmetrical vertical coverage sends more soundtoward far area of room to make front-to-back sound levels more consistent
• Components: Twenty-four (24) 25 mm (1 in)extra-high-power soft dome tweeters and six (6) 165 mm (6-1/2”) high-excursionLF drivers arranged coaxially
• Constant Beamwidth Technology™ provides constantdirectivity up to the highest frequencies and reduces out of coverage lobing
• Vertical pattern coverage is individually adjustablethrough a range of four (4) “Pattern Up” angles and four (4) “Pattern Down”coverage angles for a total of sixteen (16) different coverage combinations,all without the use of external DSP processing
• Patent-pending Tapered Horizontal Waveguide providesa continuously varying horizontal dispersion (very wide for short-throw,narrower for long-throw) delivering superior coverage in both the front andrear corners of a room
• Single-speaker room coverage at high SPL, with littleover-splash and strong bass response down to below 40 Hz
• Switchable voicing provides flat response in musicmode or mid-range presence peak in speech mode
• Swivel (pan)/tilt wall bracket included

• Power: 1000 W continuous, 2000 W program, 4000 W peak @ 4 ohms
• System:Components
  • Six (6) 165 mm (6.5 in) LF drivers
  • Twenty-four (24) 25 mm (1 in) HF drivers
• Frequency Range (-10 dB): 45 Hz – 20 kHz
• Sensitivity (2.83V@ 1m)1, 2:
  • 102 dB (at highest sensitivity setting: “Point” pattern up, “Point” pattern down, “Speech” voicing, in free space)
  • 95 dB (at lowest sensitivity setting: “Medium” pattern up, “Downfill” pattern down, “Music” voicing in free space)
• Nominal Impedance: 4 ohms (4 ohms above 1 kHz; 8 ohms below 800 Hz)
• Power Capacity:
  • 1500 W (6000 W peak), 2 hrs
  • 1000 W (4000 W peak), 100 hrs
• Maximum Input Voltage: 65.0 Volts RMS (2 hrs), 130.0 Volts Peak
• Transducers
  • Low Frequency Drivers: 6 pcs, 165 mm (6.5 in) drivers, lightweight neodymium motors, 50 mm (2.0 in) diameter voice coils, copper-capped pole tips to minimize flux modulation and linearize inductance, 16 mm (0.63 in) long coil for high linear drive and high power handling, damped blended textile surround, coated cones for moisture, UV and salt resistance. Magnetically shielded
  • High Frequency Drivers: 24 pcs, 25 mm (1 in) drivers, neodymium, encased magnet and coated diaphragm for moisture, UV, and salt resistance
• Enclosure: Fiberglass reinforced ABS cabinet, powder coated 1050 aluminum grille
  • Outdoor Capability: IP-55 rated, per IEC529, when installed with optional MTC-PC2 cover. Exceeds Mil Spec 810 for humidity, temperature & UV, ASTM G85 for acid-air/salt-spray (200 hrs)
  • Colors: Black (RAL9004) or White (-WH) (RAL9016)
• Dimensions (H x W x D): 40.2" x 9.9" x 13.6"
• Weight (cabinet): 54 lbs
• Included Accessories: Two-piece swivel (pan)/tilt wall bracket