REPLACEMENT FLOPPY DISK DRIVE FOR
ENSONIQ SD-1 AND VFX-SD KEYBOARDS
SELLER REFURB DRIVE, MODIFIED TO WORK WITH THE SD-1 and VFX-SD
BLACK FACED / 1 YEAR WARRANTY
This drive is a half height drive like normal IBM
drives, so there will be an opening at the top
between the drive and the case. (about 1/4 inch)
Drive is Seller Refurbished, and has been modified and tested on an SD-1 Keyboard for booting, loading, and formatting disks.
High density disks can be used by putting tape over
the extra hole and formatting them on the SD-1
They will mount in the case with the same holes as
the original drive.
THESE
DRIVES ARE EXTREMELY HARD TO FIND BECAUSE ENSONIQ NO LONGER SUPPORTS
THIS KEYBOARD, AND NO ONE SELLS THEM IN STORES ANYMORE.
WE ARE A FORMER ENSONIQ SERVICE CENTER AND CAN HELP YOU WITH YOUR ENSONIQ NEEDS AND ANY QUESTIONS.
I
HAVE A MASTER SERVICE TECHNICIAN WITH OVER 30 YEARS EXPERIENCE
REPAIRING AND SERVICING ELECTRONIC MUSICAL INSTRUMENTS. WE HAVE REPAIRED
THOUSANDS OF INSTRUMENTS AND REPLACED COUNTLESS BATTERIES.