Shure SM35 Cardioid Condenser Headset Microphone, SM35-XLR, with TA4F Connector, and RPM400 Preamp with 3-Pin XLR Connector
Need a replacement headset mic? The Shure SM35 offers high gain before feedback with a tight cardioid pattern, and fits Shure bodypacks with TA4F connectors.
Shure SM35 Cardioid Condenser Headset
The Shure SM35 headset condenser microphone from Shure gives multi-instrumentalists the freedom to express themselves without having to sacrifice the sound quality found in traditional microphones. A tight, unidirectional (cardioid) pickup pattern provides excellent rejection of off-axis sound sources to prevent feedback and signal bleed for superior performance on stage. Standard TA4F (TQG) connectivity seamlessly integrates into any Shure wireless bodypack system, and makes it appropriate for any stage, ranging from small clubs to large installations and arena tours.
Features:
- Wearable wireframe headset fits securely and comfortably for active performers and multi-instrumentalists
- Tight, unidirectional (cardioid) condenser pickup pattern rejects signal bleed and feedback for use on loud stages and behind floor monitors
- Flexible gooseneck design allows for optimized placement to further improve source isolation
- Lightweight and low-profile form enables comfortable, long-wearing use
- TA4F connector compatible with any Shure wireless bodypack system
- Locking snap-fit windscreen tames plosive, breath and wind noise for clean and intelligible sound
- Tailored frequency response refined for clear, crisp vocal reproduction
- Legendary Shure precision engineering for durability and performance
Specs:
- Type: Electret Condenser
- Frequency Response: 40 Hz to 20,000 Hz
- Polar Pattern: Unidirectional (Cardioid)
- Output Impedance: @ 1 kHz 2400 O
- Audio Output Level: -59.0 dBV/Pa
- Signal-To-Noise Ratio: @ 1 kHz 55 dB
- Maximum SPL: 1000 O load, @ 1% THD 153.0 dB
- Dynamic Range:@ 1 kHz, 1000 O load 114.0 dB
- Equivalent Output Noise: Typical, A-Weighted 39 dB
- Power Requirements: +5 V DC (nominal), 10 V maximum (DC bias)
- Polarity: Positive pressure on diaphragm produces positive voltage on pin 3 with respect to pin 1
- Cable: 1.1 m (45 in.)
- Connector: TA4F
- Net Weight: 72 g (2.53 oz.)
zZounds is an authorized dealer of Shure products.
Shure SM35 Cardioid Condenser Headset
The Shure SM35 headset condenser microphone from Shure gives multi-instrumentalists the freedom to express themselves without having to sacrifice the sound quality found in traditional microphones. A tight, unidirectional (cardioid) pickup pattern provides excellent rejection of off-axis sound sources to prevent feedback and signal bleed for superior performance on stage. Standard TA4F (TQG) connectivity seamlessly integrates into any Shure wireless bodypack system, and makes it appropriate for any stage, ranging from small clubs to large installations and arena tours.
Features:
- Wearable wireframe headset fits securely and comfortably for active performers and multi-instrumentalists
- Tight, unidirectional (cardioid) condenser pickup pattern rejects signal bleed and feedback for use on loud stages and behind floor monitors
- Flexible gooseneck design allows for optimized placement to further improve source isolation
- Lightweight and low-profile form enables comfortable, long-wearing use
- TA4F connector compatible with any Shure wireless bodypack system
- Locking snap-fit windscreen tames plosive, breath and wind noise for clean and intelligible sound
- Tailored frequency response refined for clear, crisp vocal reproduction
- Legendary Shure precision engineering for durability and performance
Specs:
- Type: Electret Condenser
- Frequency Response: 40 Hz to 20,000 Hz
- Polar Pattern: Unidirectional (Cardioid)
- Output Impedance: @ 1 kHz 2400 O
- Audio Output Level: -59.0 dBV/Pa
- Signal-To-Noise Ratio: @ 1 kHz 55 dB
- Maximum SPL: 1000 O load, @ 1% THD 153.0 dB
- Dynamic Range:@ 1 kHz, 1000 O load 114.0 dB
- Equivalent Output Noise: Typical, A-Weighted 39 dB
- Power Requirements: +5 V DC (nominal), 10 V maximum (DC bias)
- Polarity: Positive pressure on diaphragm produces positive voltage on pin 3 with respect to pin 1
- Cable: 1.1 m (45 in.)
- Connector: TA4F
- Net Weight: 72 g (2.53 oz.)
zZounds is an authorized dealer of Shure products.
| Condition | Brand New (New) Brand New items are sold by an authorized dealer or original builder and include all original packaging.Learn more |
|---|---|
| Brand | |
| Model |
|
| Categories | |
| Microphone Type |
|
| Wired/Wireless |
|
| Electronics |
|
| Polar Pattern |
|
Product safety information may be available here.





