Designed for active performers, Shure's WH20 headset microphone is built for comfort and reliability in any setting -- from the stage to the fitness studio.
Shure WH20 Dynamic Headset Microphone
The Shure WH20 is a rugged, lightweight, dynamic headset microphone that provides high-quality voice pickup. It fits securely for active microphone users, such as aerobics instructors and musicians, with low visibility for stage appearances.
The cardioid (unidirectional) pickup pattern provides greater gain-before-feedback and isolation from ambient noise and other unwanted sound sources. A carefully shaped frequency response includes a voice-frequency presence peak and a low-frequency roll-off to compensate for the proximity effect inherent in cardioid mics during close-talk operation.
Features:
- Lightweight wireframe and elastic headband adjust for a secure, comfortable fit
- Extra-strong, small-diameter attached microphone cable resists breakage
- Collapsible microphone boom for easy storage and transportation
- Smooth, natural frequency response comparable to high-quality dynamic hand-held vocal microphones
- High input clipping level eliminates overload distortion
- Reliable at temperature and humidity extremes
- Supplied foam windscreen and clothing clip
Specs:
- Type: Dynamic, Close-Talking - Frequency Response (at 8 mm) : 50 to 15,000 Hz
- Polar Pattern: Cardioid (unidirectional) response -- uniform with frequency, symmetrical about axis
- Impedance: Microphone rating impedance is 150 ohms (200 ohms actual)
- Output Level (close talked (at 12.5 mm (1/2 inch)) at 1,000 Hz) :
- Open Circuit Voltage: -67.0 db/Pa (0.45 mV) - (1 Pa = 94 dB SPL)
- Hum Sensitivity: 38.4 dB equivalent SPL in a 1 millioersted field - Polarity:
- WH20XLR as a wired microphone: Positive sound pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3 of microphone output XLR connector
- Environmental Conditions: - Operating Temperatures: -18 to 60 degrees C (0 to 140 degrees F)
- Storage Temperatures: -29 to 74 degreesC (-20 to 165 degrees F) - Humidity: 0 to 95%
- Cable: Attached 1.22 m (4 ft), small-diameter, shielded, PVC-jacketed, two-conductor.
- Cable Connector: Three-pin XLR with detachable belt clip
- Construction: - Black thermoplastic housing - Stainless steel grille - Black TEFLON-coated stainless steel wireframe - Flexible plastic-clad monel gooseneck - Rubber/nylon elastic headband
- Net Weight (including connector) : 98 g (3.5 oz)
zZounds is an authorized dealer of Shure products.
Shure WH20 Dynamic Headset Microphone
The Shure WH20 is a rugged, lightweight, dynamic headset microphone that provides high-quality voice pickup. It fits securely for active microphone users, such as aerobics instructors and musicians, with low visibility for stage appearances.
The cardioid (unidirectional) pickup pattern provides greater gain-before-feedback and isolation from ambient noise and other unwanted sound sources. A carefully shaped frequency response includes a voice-frequency presence peak and a low-frequency roll-off to compensate for the proximity effect inherent in cardioid mics during close-talk operation.
Features:
- Lightweight wireframe and elastic headband adjust for a secure, comfortable fit
- Extra-strong, small-diameter attached microphone cable resists breakage
- Collapsible microphone boom for easy storage and transportation
- Smooth, natural frequency response comparable to high-quality dynamic hand-held vocal microphones
- High input clipping level eliminates overload distortion
- Reliable at temperature and humidity extremes
- Supplied foam windscreen and clothing clip
Specs:
- Type: Dynamic, Close-Talking - Frequency Response (at 8 mm) : 50 to 15,000 Hz
- Polar Pattern: Cardioid (unidirectional) response -- uniform with frequency, symmetrical about axis
- Impedance: Microphone rating impedance is 150 ohms (200 ohms actual)
- Output Level (close talked (at 12.5 mm (1/2 inch)) at 1,000 Hz) :
- Open Circuit Voltage: -67.0 db/Pa (0.45 mV) - (1 Pa = 94 dB SPL)
- Hum Sensitivity: 38.4 dB equivalent SPL in a 1 millioersted field - Polarity:
- WH20XLR as a wired microphone: Positive sound pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3 of microphone output XLR connector
- Environmental Conditions: - Operating Temperatures: -18 to 60 degrees C (0 to 140 degrees F)
- Storage Temperatures: -29 to 74 degreesC (-20 to 165 degrees F) - Humidity: 0 to 95%
- Cable: Attached 1.22 m (4 ft), small-diameter, shielded, PVC-jacketed, two-conductor.
- Cable Connector: Three-pin XLR with detachable belt clip
- Construction: - Black thermoplastic housing - Stainless steel grille - Black TEFLON-coated stainless steel wireframe - Flexible plastic-clad monel gooseneck - Rubber/nylon elastic headband
- Net Weight (including connector) : 98 g (3.5 oz)
zZounds is an authorized dealer of Shure products.
Condition | Brand New (New) Brand New items are sold by an authorized dealer or original builder and include all original packaging.Learn more |
Brand | |
Model |
|
Categories | |
Microphone Type |
|
Wired/Wireless |
|
Electronics |
|
Polar Pattern |
|