Hard to get-only a few!
This is the new PB-1 100 Watt Attenuator
This post is for the RED surface color
For a limited time.... a free quality speaker cable included... ready to rock!
Attenuation: This is a rotary switch that selects the amount of attenuation. Min position is true bypass.
Positions 4-1 adds 1.8 dB of attenuation per click.
Studio Level: A rheostat that will adjust the amp’s output from -7.2 dB down to -30 dB.
The PB1/AT100-P attenuator was designed to let you maintain your amp’s tube tone at higher volumes where the tubes really start to sing and great dynamic responses are created, while keeping the overall volume under control.On stage, at home jamming or especially in home studios to really attenuate the overall volume down to 1 watt or less (amp less 100w)
The PB1 gives you unlimited flexibility for different volume levels.
The PB-1 is designed for up to 100 watt max tube amplifiers only.
This is a resistor-based model like Dr. Z and other quality attenuators that hooks in line from the speaker to the head not in the effects loop etc. Note*** always use a quality 16 gauge or better speaker cable for this connection.
This model will also work with any standard ohm speaker rating. ( Plug and Play)
All alloy case lets the PB attenuator dissipate heat very easily.
Features:
Top Controls:
Attenuation: This is a rotary switch that selects the amount of attenuation. Mini position is true by¬pass. Positions 4-1 adds 1.8 dB of attenuation per click.
Studio Level: A rheostat that will adjust the amp’s output from -7.2 dB down to -30 dB.
Side Jacks:
IN: Connect a speaker cable from this jack to your amp’s speaker out jack.
OUT: Connect a speaker cable from this jack to your speaker cabinet. It is optimal to match your amp speaker out to the external speaker rating. (ex: 8 ohm speaker out jack on amp with 8 ohm speaker cab.)
Enclosure:
Aluminum alloy case let's the PB-1 attenuator dissipate heat easy.
Weight : 1.8kg(unpacked)
Dims: 162 x 74.5 X 250mm
(NOTE: Cords from amp and to speakers must be heavy-duty speaker cable with 1/4" phone-type speaker connectors.)
Thanks from The Earth City Sound Company