Marantz 2265 Vintage Stereo Receiver, serviced and repaired, beautiful condition
This gear has sold
See similar gear from other Reverb sellers
Listed:4 years ago
Views:103
Saves:7
Offers:1
Fullerton, CA, United States
Our users rate Reverb
For sale is Beautiful Marantz 2265 vintage Stereo Receiver,
Replaced all the lights with a modern LED Lights and awesome looking mid century Stereo Receiver, all the knobs and faceplate has been polished, unit inside and outside both very clean.
Recently serviced, all the pots, push button and selectors has been DeoXit, no static or humming sound,
Unit tech go through and replaced Relay, some transistors and some capacitor,
After serviced and repaired Receiver played 4-5 hours straight, played awesome and Crystal clear sounding,
Unit bought from original owner, he brought all the way from Europe, it’s European version and it has a voltage selector and it has a unique serial # E010203.
Unit has a some small scratches but nothing major scratches.
Description
The Marantz 2265 is an all solid state receiver incorporating the innovative design and unparalleled technology that have made Marantz famous in the audio component industry.
The 2265 features a sensitive FM tuner,a highly selective AM tuner, a low distortion preamplifier, and two direct coupled power amplifiers on a single chassis, while retaining a flexibility comparable to that achieved using separate components.
The FM tuner utilises a MOSFET front end, ceramic IF filters, and a phase locked loop multiplex decoder.
The AM tuner features an advanced integrated circuit and ceramic IF filters for high selectivity and sensitivity.
The amplifier sections permit the connection of two stereo pairs of loudspeakers, a turntable or record changer, two tape recorders, stereo headphones, and an auxiliary source such as an additional tuner or a TV sound source.
The Marantz 2265 also features a variable turnover tone control and front panel dubbing jacks.
Specifications
2265
2265B
Tuning range: FM, MW
Power output: 65 watts per channel into 8Ω (stereo)
Frequency response: 20Hz to 20kHz
Total harmonic distortion: 0.08%
Damping factor: 55
Input sensitivity: 1.8mV (MM), 180mV (line)
Signal to noise ratio: 76dB (MM), 88dB (line)
Output: 775mV (line), 1.5V (Pre out)
Semiconductors: 4 x IC, 66 x transistors, 51 x diodes, 4 x FET
Dimensions: 440 x 137 x 365mm
Weight: 15.9kg
Thanks for watching
Replaced all the lights with a modern LED Lights and awesome looking mid century Stereo Receiver, all the knobs and faceplate has been polished, unit inside and outside both very clean.
Recently serviced, all the pots, push button and selectors has been DeoXit, no static or humming sound,
Unit tech go through and replaced Relay, some transistors and some capacitor,
After serviced and repaired Receiver played 4-5 hours straight, played awesome and Crystal clear sounding,
Unit bought from original owner, he brought all the way from Europe, it’s European version and it has a voltage selector and it has a unique serial # E010203.
Unit has a some small scratches but nothing major scratches.
Description
The Marantz 2265 is an all solid state receiver incorporating the innovative design and unparalleled technology that have made Marantz famous in the audio component industry.
The 2265 features a sensitive FM tuner,a highly selective AM tuner, a low distortion preamplifier, and two direct coupled power amplifiers on a single chassis, while retaining a flexibility comparable to that achieved using separate components.
The FM tuner utilises a MOSFET front end, ceramic IF filters, and a phase locked loop multiplex decoder.
The AM tuner features an advanced integrated circuit and ceramic IF filters for high selectivity and sensitivity.
The amplifier sections permit the connection of two stereo pairs of loudspeakers, a turntable or record changer, two tape recorders, stereo headphones, and an auxiliary source such as an additional tuner or a TV sound source.
The Marantz 2265 also features a variable turnover tone control and front panel dubbing jacks.
Specifications
2265
2265B
Tuning range: FM, MW
Power output: 65 watts per channel into 8Ω (stereo)
Frequency response: 20Hz to 20kHz
Total harmonic distortion: 0.08%
Damping factor: 55
Input sensitivity: 1.8mV (MM), 180mV (line)
Signal to noise ratio: 76dB (MM), 88dB (line)
Output: 775mV (line), 1.5V (Pre out)
Semiconductors: 4 x IC, 66 x transistors, 51 x diodes, 4 x FET
Dimensions: 440 x 137 x 365mm
Weight: 15.9kg
Thanks for watching
Reverb Buyer Protection
Reverb has your back if your item is lost, damaged, or doesn't match its description. Simply report any issues within 7 days and we'll help you get a full refund.Learn more about Reverb Buyer Protection.
| Listed | 4 years ago |
|---|---|
| Condition | Excellent (Used) Excellent items are almost entirely free from blemishes and other visual defects and have been played or used with the utmost care.Learn more |
| Brand | |
| Model |
|
| Finish |
|
| Categories | |
| Year |
|
| Made In |
|
Product safety information may be available here.
