This product has an estimated 3-5 day shipment processing time.
Authentic Transparency for Unrestricted Creativity
- Unsurpassed ambience retrieval
- Transformerless design with matched hi-speed discrete transistor octet has +23 dBu input headroom: no attenuator “pads” needed
- Uncolored timbral accuracy at all dynamic levels
- Entirely balanced audio path with precision components maintains signal integrity: THD under 5 ppm (.0005%)
- Effortless, vividly realistic musical performance
- Laser-trimmed FET-based output stage has 32 dB headroom: drives 1000 foot (300 m) cable runs with ease
- Standard 36-step gain controls (1.5 dB per step) are stereo matched to .08 dB
- Ultra-clean universal power supply
- Grayhill mil-spec gold switching
- Welded 16 gauge steel rack chassis
- Lovingly hand-crafted in Northern California
Options
- Ribbon optimized DC coupled input - $100/channel
- Extra 10dB gain - no charge
- DPA 130V input - $300/channel
- Dante or MADI digital output expander PCB
- Analog output expander PCB (3x outputs per channel)
Specifications
Minimum Gain
8.5 dB
Maximum Gain (1.5 dB per step, 36 steps)
60 dB (up to 70 dB on request)
Frequency Response (+0 / -3 dB)
sub 8 Hz to beyond 300 kHz (sub 3 Hz by request)
Noise (60 dB Gain, 10 Hz - 30 kHz, Inputs common)
-133 dB EIN
Total Harmonic Distortion + Noise (35 dB Gain, 10 Hz - 20 kHz bandwidth, +27 dBu Out)
< .001%, Typ. < .0005% (< 5 ppm)
Intermodulation Distortion (50 Hz & 7 kHz) 35 dB Gain, +27 dBu Out
< .0009%
Phase Response (35 dB Gain, 50 Hz - 20 kHz bandwidth, +27 dBu Out)
< 2 degrees deviation
Common Mode Rejection Ratio (35 dB Gain, 10 Hz - 20 kHz bandwidth, 100 mV C.M.)
> 65 dB, Typ > 85 dB
Slew Rate (35 dB Gain, +27 dBu Out)
> 25 Volts per microsecond
Maximum Input Level (20 Hz - 40 kHz)
+23 dBu (no attenuator pads required)
Maximum Output Level (20 Hz - 40 kHz)
+32 dBu
Phantom Input Impedance (1 kHz)
6,750 ohms
Output Impedance
24.3 Ohms (x2)
DPA (B&K) Mic Powering
+130 V dc max, (non-phantom)
Phantom Powering
+48 V dc, +/- 4 V dc
Power Consumption
45 watts maximum
Power Requirements
100V to 240V, 50/60 Hz
Dimensions/Shipping Weight
19” W x 3.5” H x 12.5” D, 23 lbs.
DANTE
Physical Layer
Ethernet
Connectors
Dual RJ-45 (Primary / Secondary)
Cable Quality
CAT-5e or better
Transmission Speed
1Gbps
Supported Sample Rates
44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
Minimum Dante Latency
250 µS
Supported Modes
Redundant / Switched
AES67 Support
Planned (Dante embedded)
Certifications
FCC CFR 47 Part 15 Subpart B, Class A
ICES-03 Issue 6 (Canada)
ANSI C63.4-2014
EN 55032:2015, EN 55035:2017, EN 61000-3-2:2014, EN 61000-3-3:2013
Compliance
RoHS 2011/65/EU (and delegated directive (EU) 2015/863)
WEEE 2012/19/EU + REACH