The Fender Engine Room LVL 8 Pedal Power Supply provides clean isolated power for up to eight 9 V pedals at 500 mA each, it easily takes care of even the hungriest modern delay and reverb pedals and comes with all the required power cables.

Two of the eight outputs are independently switchable between 9 V, 12 V and 18 V to cover any pedals that run at a higher voltage e.g. overdrive pedals that can be run at 18 V for extra headroom (the power available drops from 500 mA at 9 V to 375 mA at 12 V and then 250 mA at 18 V). The LVL 8 can be powered by the LVL 12 by daisy chaining the two together (extension lead provided with the LVL 12) allowing easy expansion of the system for even the biggest pedalboards. The Engine Room Power Supply is perfect for touring, it has an IEC socket capable of accepting 100-240 V, 50-60 Hz inlet voltage allowing it to be used anywhere in the world (this version comes with a UK 3 pin IEC power cable) and its chassis is crafted from durable and lightweight anodised aluminium with a sleek, low profile shape designed to fit under most pedalboards. The pedal output sockets are all centre negative and each feature a LED indicator that goes red if the power draw is too high and the LVL 8 even features a 5 V USB A and USB C output sockets for charging smart phones, tablets, wireless guitar transmitters etc.

A full breakdown of the included accessories is as follows:

• Four 60 cm (24") pedal power cables with 2.1 mm barrel connectors
• Two 45 cm (18") pedal power cables with 2.1 mm barrel connectors
• Two 30 cm (12") pedal power cables with 2.1 mm barrel connectors
• One 45 cm (18") power cable with 2.5 mm to 2.1 mm barrel connectors (green plug)
• One 45 cm (18") power cable with 2.5 mm to 2.1 mm reverse polarity barrel connectors (red plug)
• One 45 cm (18") power cable with 3.5 mm TS mini jack to 2.1 mm barrel jack connectors
• One 45 cm (18") power cable with 9 V Battery clip to 2.1 mm barrel jack connectors
• One 2 m (6.6 ft) IEC power cable with UK plug

Features

• The Fender LVL 8 provides clean, ground isolated power for eight 9 V pedals at a massive 500 mA each
• Two of the eight outputs are independently switchable to 9 V, 12 V or 18 V for higher voltage pedals
• Create huge pedalboards by daisy chaining the LVL 8 to the LVL 12 for 20 possible outputs
• Capable of accepting 100-240 V, 50-60 Hz inlet voltage allowing it to be used anywhere in the world
• Touring ready chassis crafted from durable and lightweight anodised aluminium
• Sleek, low profile shape designed to fit under most pedalboards
• Pedal output sockets each feature a LED indicator that goes red if it is overloaded
• USB A and USB C output sockets for charging smart phones, tablets, wireless guitar transmitters etc.
• All pedal outputs centre negative
• 2 m (6.6 ft) IEC power cable with UK plug included
• 8 Pedal power cables included with standard 2.1 mm barrel connectors
• 4 Adapter cables included, 2.5 mm barrel, reverse polarity, 3.5 mm TS mini jack and 9V battery clip

Tech Specs

• Length: 244 mm (9.6")
• Width: 91 mm (3.6")
• Height: 42 mm (1.65")
• Manufacturer Part Number: 0230104008
• UPC-A: 885978685547

Ordering multiple items from us?

If you order more than one item from us we’ll ship all the items together in the most cost effective way and refund you the difference.