Impeccable build-quality, top-grade components and useful built-in features make this an outstanding mic for any studio! The MA-301fetVG from Mojave Audio is a multi-pattern large diaphragm, solid-state condenser microphone. Based upon the popular MA-201VG designed by David Royer, the MA-301VG adds a 3-position pickup pattern selector, a 15dB pad and a switchable bass roll-off.
Utilizing a 3-micron gold-sputtered capsule, high-quality Jensen audio transformer, military-grade FET and custom designed low-noise resistors, the MA-301VG performs at a level reminiscent of some of the best loved classic condenser microphones. Each MA-301VG microphone is carefully tested and evaluated, then packaged in its protective case with a professional grade shockmount.
Mojave Audio MA-301fetVG Condenser Mic Specifications
- TRANSDUCER TYPE: Externally polarized, pressure gradient capacitor - double diaphragm.
- DIAPHRAGM: 1-inch diameter, gold sputtered
- DIAPHRAGM THICKNESS: 3 microns
- POLAR PATTERN: 3 patterns; omni, cardioid and figure-8
- FREQUENCY RESPONSE: 20 Hz to 20 KHZ, +/-3 dB at "flat" setting of bass cut switch. Bass cut switch provides 6 dB per octave attenuation below 100 Hertz in "cut" setting
- SENSITIVITY: -40.5 dB, re. 1V/pa
- MAXIMUM SPL: 120 dB with pad off, 135 dB with pad on.
- DISTORTION: < 1% @ 120 dB SPL , < 3% @ 134 dB SPL with pad off, < 1% @ 134 dB SPL, < 3% @ 148 dB SPL with pad on
- SELF NOISE: 14dB nominal, not to exceed 16dB (A weighted)
- PAD: 15 dB
- BASS CUT: 6 dB per octave below 100 hertz.
- IMPEDANCE: 550 ohms, transformer balanced (Jensen)
- POWERING: 48VDC phantom power; current 1.2 mA
- Dimensions and Weight:
- Carrying case with microphone, shock mount: 10" x 9" x 4.5", 4 lbs.
- Microphone: 7 5/8" X 2" (194mm x 51mm), 1 lb. (0.45Kg)