The Shure SM86 Handheld Condenser Microphone is a unidirectional (cardioid) condenser vocal microphone for professional use in live performance. An extremely rugged microphone, the Shure SM86 withstands the rigors of touring while delivering a clear, studio-quality sound. A cardioid pickup pattern isolates the main sound source while minimizing unwanted background noise. The built-in three-point shock mount minimizes handling noise, and a two-stage pop filter reduces wind and breath "pop" noise.

• Lead Vocals
• Backup Vocals

• Condenser cartridge for studio quality sound
• Tailored frequency response for a clear reproduction of vocals
• Rugged construction withstands the rigors of touring sound
• Cardioid polar pattern minimizes unwanted background noise
• Excellent choice for stage monitors and personal monitors
• Built-in three-point shock mount minimizes handling noise
• Two-stage "pop" filter reduces wind and breath noise

• Type: Electret Condenser
• Frequency Response: 50 to 18,000 Hz
• Polar Pattern: Cardioid
• Output Impedance at 1k Hz: 150 Ohm
• Sensitivity (at 1kHz, Open Circuit Voltage): -50 dBV/Pa (3.15 mV)
• Output Clipping Level (1 k Ohm Load, at 1 kHz): + 3 dBV (1.41 V)
• Maximum SPL (1 k Ohm Load, 1% THD): 147 dB
• Self Noise: 23 dB Typical, A-Weighted
• Dynamic Range: 1 k Ohm Load; 124 dB
• Signal-To-Noise Ratio: 71 dB
• Polarity: Positive Pressure on Diaphragm Produces Positive Voltage on Pin 2 with Respect to Pin 3
• Power Requirements:
  • Phantom Power: 11 to 52V DC
  • Current Drain: 5.2 mA
• Connector: Three-Pin Professional Audio Connector
• Housing: Dark Gray, Enamel-painted, Die Cast Metal; Matte-finished, Silver Colored, Spherical Steel Mesh Grille
• Net Weight: 278 g (9.8 oz.)
• Environmental Conditions:
  • Operating Temperature: -18° to 60° C (0° to 135° F)
  • Storage Temperature: -29° to 74° C (-20° to 165° F)
  • Relative Humidity: 0 to 90%

• 1 x Shure SM86 Handheld Condenser Microphone
• 1 x Shure A25D Break Resistant Microphone Clip
• 1 x Shure 26A13 Microphone Bag
• 1 x Shure 31A1856 5/8" to 3/8" Thread Adapter
• 2 Year Warranty