Frenzel FM 5E3DP Deluxe Plus
This is a hand wired boutique amp made my Jim Frenzel. It has 25 watts of output power, and two channels that can be bridged. The first channel is reminiscent of a Fender Deluxe 5E3 circuit. The second channel is reminiscent of the Marshall JTM45 sound. Bridged together with an ABY box, this amp has some serious tone. Cleanest of cleans, both mellow or bright (depending on the channel used) and some nice mellow overdrive "growl" from the Fender channel and a brighter "bark" overdrive from the Marshall tone. I've played and owned a lot of amps in my time and this one is of my favorite inexpensive amps I've owned. I love it as a studio guy because I can find almost any tone I'd need in just one amp, that isn't a modern 3 channel PCB piece of crap.
The amp is great condition and has no issues at all. JJ tubes throughout that are pretty new. No old caps or any of that mess you get with really old amps, which is nice is you're a gigging musician. This amp is loud as heck or with the master volume, it can be dialed back.
Here's a bit of the literature about the amp from Jim Frenzel himself:
Input Jacks isolated from chassis for low noise, eddy currents, and hum.
DC on filaments for low 60 hz hum.
Star ground system to reduce induced current chassis noise.
Type F (Fender) and Type M (Marshall) inputs with separate preamps and Gain controls for the smooth Fender warm blues tones or the Marshall Plexi high-mid dynamic rock tones. You can use an AB-Y switch to select either channel or blend them together to create your own unique tones.
Classic Fender Bassman 5F6 style 3-BAND TONE STACK for extended flexibility in shaping your tone.
MASTER level control so you can crank the GAIN's up and overdrive the preamp without overdriving the output tubes.
Classic Fender Bassman Style Presence control for dynamic treble punch!
Unique "Edge" pull-switch on the PRESENCE control that transforms the power amp section into a No-Negative-FeedBack style amp for more open, less compressed tones.
Line Out - post output transformer LINE OUT with LINE OUT LEVEL control for recording or driving a power amp, Auto switched internal load to simulate speaker if speaker is not plugged in. Inject great tone directly into the PA system with the Microphone Simulated Direct Interface.
Class AB fixed biased 6L6's in the output in place of the original Deluxe 6V6's to give you more power and headroom. The bias is optimized using FRENZEL MVD Bias (Multi-Valve Design) which allows you to use octal based 6L6, 5881, KT66, KT88, 6550 in the output stage without adjusting the bias. (Please note you can still use 6V6's which will give you about 15 watts output.)
Preamp and driver tubes are JJ 12AX7's known for low noise and linearity. You may also use 12AT7's or 12AU7's for different tones and less preamp overdrive.
***NEW FEATURE*** - Retro Vintage Cage - heavy duty steel mesh cage provides protection and excellent ventilation for tubes. Includes Fender style strap handle with nickel plated end caps.
Dimensions - 12"W x 10"D x 8"H
Weight: 15 lbs
Power Output - 25 watts @ 8 ohms
5AR4/GZ34 rectifier in place of original 5Y3 for better pick attack and less sag...or you can use a Solid Slate plug-In rectifier for tha Marshall super tight no sag sound.
IEC three prong grounded power cord connector.
STANDBY switch to turn off the plate voltage during warm-up.
Rock solid point-to-point hand wiring using only the best of parts...low noise tubular polypropylenes caps, metal film resistors, Micalex sockets, premium low noise jacks...etc.
Sweet vintage clean to classic overdrive tones with three different types of distortion depending on whether you are overdriving the preamp, output... or both!
Tube complement: The amp comes with 3 - 12AX7, 2 - 6L6, 1 - 5AR4
This amp will come packed professionally with tubes removed and bubble wrapped and even boxed separately if needed. I also have the metal cage covering for the amp that I will include.
The amp is great condition and has no issues at all. JJ tubes throughout that are pretty new. No old caps or any of that mess you get with really old amps, which is nice is you're a gigging musician. This amp is loud as heck or with the master volume, it can be dialed back.
Here's a bit of the literature about the amp from Jim Frenzel himself:
Input Jacks isolated from chassis for low noise, eddy currents, and hum.
DC on filaments for low 60 hz hum.
Star ground system to reduce induced current chassis noise.
Type F (Fender) and Type M (Marshall) inputs with separate preamps and Gain controls for the smooth Fender warm blues tones or the Marshall Plexi high-mid dynamic rock tones. You can use an AB-Y switch to select either channel or blend them together to create your own unique tones.
Classic Fender Bassman 5F6 style 3-BAND TONE STACK for extended flexibility in shaping your tone.
MASTER level control so you can crank the GAIN's up and overdrive the preamp without overdriving the output tubes.
Classic Fender Bassman Style Presence control for dynamic treble punch!
Unique "Edge" pull-switch on the PRESENCE control that transforms the power amp section into a No-Negative-FeedBack style amp for more open, less compressed tones.
Line Out - post output transformer LINE OUT with LINE OUT LEVEL control for recording or driving a power amp, Auto switched internal load to simulate speaker if speaker is not plugged in. Inject great tone directly into the PA system with the Microphone Simulated Direct Interface.
Class AB fixed biased 6L6's in the output in place of the original Deluxe 6V6's to give you more power and headroom. The bias is optimized using FRENZEL MVD Bias (Multi-Valve Design) which allows you to use octal based 6L6, 5881, KT66, KT88, 6550 in the output stage without adjusting the bias. (Please note you can still use 6V6's which will give you about 15 watts output.)
Preamp and driver tubes are JJ 12AX7's known for low noise and linearity. You may also use 12AT7's or 12AU7's for different tones and less preamp overdrive.
***NEW FEATURE*** - Retro Vintage Cage - heavy duty steel mesh cage provides protection and excellent ventilation for tubes. Includes Fender style strap handle with nickel plated end caps.
Dimensions - 12"W x 10"D x 8"H
Weight: 15 lbs
Power Output - 25 watts @ 8 ohms
5AR4/GZ34 rectifier in place of original 5Y3 for better pick attack and less sag...or you can use a Solid Slate plug-In rectifier for tha Marshall super tight no sag sound.
IEC three prong grounded power cord connector.
STANDBY switch to turn off the plate voltage during warm-up.
Rock solid point-to-point hand wiring using only the best of parts...low noise tubular polypropylenes caps, metal film resistors, Micalex sockets, premium low noise jacks...etc.
Sweet vintage clean to classic overdrive tones with three different types of distortion depending on whether you are overdriving the preamp, output... or both!
Tube complement: The amp comes with 3 - 12AX7, 2 - 6L6, 1 - 5AR4
This amp will come packed professionally with tubes removed and bubble wrapped and even boxed separately if needed. I also have the metal cage covering for the amp that I will include.
Reverb-Käuferschutz
Reverb hilft dir weiter, wenn dein Artikel verloren geht, beschädigt ist oder nicht der Beschreibung entspricht. Melde alle Probleme einfach innerhalb von 7 Tagen und wir verhelfen dir zu einer vollständigen Rückerstattung.Erfahre mehr über den Reverb-Käuferschutz.
| Inseriert | vor 10 Jahren |
|---|---|
| Zustand | Neuwertig (Gebraucht) Neuwertige Artikel sind generell in fast neuem Zustand, aber wurden geöffnet oder gespielt bzw. benutzt.Weitere Informationen |
| Marke | |
| Modell |
|
| Kategorien |
Möglicherweise sind hier Informationen zur Produktsicherheit verfügbar.

