Randall Warhead

Back up for sale is a Randall Warhead that was unfortunately damaged during shipping to a previous customer. Thanks to Rainbow Electronics in Citrus Heights California, this amp is ready to find a new home after a professional repair. This amp is 100 percent functional but since the repair some changes have happened. The back plate on the amp received some damage that resulted in a superficial crack on the particle board and is visible on the tolex (I put some force on it in one of the photos so it is more visible but when mounted in place, the board is straight and the crack in the tolex is difficult to see). 2 of the left side mounting screws for it are missing (unfortunately) and it appears the right side screws may be different to the original screws from the factory as well as there being cosmetic damage to the back side of the back plate. Inside the shell, you will notice some scratching on the paint for the electrical chassis, but again, it is just cosmetic damage as well as the electrical components needed to be refitted to the shell of the amp since it was forcibally separated from the shipping damage. Another change was due to damage to some of the knobs being bent, consequently the original push pull pot for the gain boost switch had to be replaced with one that is a spring loaded version, but it still accomplishes the same task however I did have to modify the knob itself so the push toggle system would work properly. In summary, the pot shaft is a bit shorter than the original stock pot, so I put some paper into the knob seating area to keep the knob itself from seating too far and prevent knob from prevent the push pull from clean to dirty channel to activate (I will go over this in detail in the youtube linked video). This amp does not come with a footswitch (I purchased it and there wasn't one included) but thankfully unlike the RG100es, this amp can accept channel foot switches that are not proprietary. There is some tolex peeling on the underside and some of the front grill side areas of the amp. The bottom side tolex peeling has progressed a bit more but it is only cosmetic and not visible unless you flip the amp on its back. I also included a photo of the receipt for the repair (unfortunately due to age is faded and hard to read with some water damage). I can include the original pictures of the first listing for comparison, and some pictures of the damage that occurred during shipping (from the messages from the previous seller). If you have any questions or offers please feel free to reach out.

[Edit 7/28/24] While visibile in the photo I have of the front of the amp, I didn't notice damage to the metal plate of the grill on the amp. Have updated and included a photo showing the cosmetic damage to it. This listing will also be updated to include a youtube link to a video demo of the amp showing how it works, and some information regarding the pull push clean to dirty. If you have any questions please reach out, thanks!