TOA Graphic Equalizer E112 Black

Condition Note Cosmetic Surface paint wear, scratches, a few bent EQ pins and front panel is pulling away from base a bit... However this is a solid unit that has been tested. All working perfectly as intended.

• E 112 is a double channel , 1/1 octave active graphic equalizer designed to allow clean, accurate audio  equalization for stage, studio, or commercial applications,
• The E 111 and E 112 provide 12dB of boost or cut at each of its 10 frequencies per channel, which are centered at ISO 1/1 octave increments from 31.5Hz to 16kHz.
• The center frequency of each filter is continuously variable over a range of one octave and the "Q" of each filter is continuously variable from 1.5 to 8.0
• Signal to noise ratio is over 120dB making E 112 one f the quietest equalizers on the market.
• The active bandpass/bandreject filters of the E 112 are designed for minimum phase shift, and feature smooth slide controls with center de tents for easy and accurate adjustment. The filters are summed in parallel for reliability,so that the failure of one filter does not interrupt operation of the others.
• In addition, high-pass and low-pass filters are provided on the front panel.
• The high-pass filter has a slope of 12 dB per octave and its cutoff frequency is 40Hz
• The low-pass filter has a 12 dB per octave slope and its cutoff frequency is12kHz.
• An input level control on the E 112 gives 12 dB of adjustment to allow a wide variety of input sources.
• An LED indicator illuminates when either theinput or the output comes within 6 dB of clipping.
• In addition to the usual EQin/out switch, an automatic EQ bypass function provides complete equalizationbypass in the event of loss of AC power, and an output muting functionsuppresses turn-on/turn-off transients.
• Inputs and outputs are transformer-isolated and balanced, with both XLR and1/4" stereo phone jacks.
• Ground lift switches are provided at both inputs and outputs to reduce hum and prevent ground loops.
• The E 111 and E 112 can be mounted in a standard 19" rack and occupy 5-1/4" ofvertical space.
• The rugged front panel is made of 1/8" (3mm) cast aluminum,backed with a 1/8" ( 3 m m ) steel liner for added durability.