Faber 6050 Master Kit Plus USA/ABR-1 Aged Nickel

Our BEST sustain & tone enhancing products can now be ordered in one convenient “Master Kit,” at a 5% discount over buying the parts separately! Pre Notched NICKEL PLATED BRASS SADDLES STANDARD. Other saddles options available.

Standard in this Master Kit:

Tone-Lock™ Bridge – Standard Matching Pre-Notched Saddles

• Length: 3.31″/84.1mm
• Saddle radius: 12″
• Post spacing: 2.91″/74.0mm (0.8mm lock nut clearance to accommodate 73.6mm-74.4mm post spacing)
• Post hole diameter (stepped): upper, .293″/7.45mm; lower, .2165″/5.5mm
• String Spread (center-to-center, outer saddles): 2-1/16″/2.0625″/52.39mm

TP-’59 Tailpiece – Lightweight Aluminum stop tailpiece

• Material: Aluminum, plated
• Weight: 1.0 oz./28.45g
• Overall length: 3.987″/101.27mm
• Stud spacing: 3.25″/82.55mm
• Stud opening: .32″/8.1mm

Tone-Lock™ INCH – Tone-Lock™ studs/spacers 5/16-24 for all Gibson

• Material: Steel, plated
• Weight (pair without spacers): .88 oz./25g
• Overall Length: 1.378″/35mm
• Thread length: .906″/23mm
• Thread pitch: 5/16-24
• Head diameter: .51″/13mm
• Head thickness: .157″/4.0mm
• Spacers, two each: diameter: .51″/13mm, thickness: .099″/2.5mm; .157″/4.0mm; .217″/5.5mm

“PLUS” USA/ABR-1 – Bridge Posts – Now made from the finest GERMAN BELL BRASS!

• Overall length: 1.25” / 31.75mm
• Length below flange: .55” / 14.0mm
• Stud length, above flange: .59” / 15.0mm
• Stud thread, 6-32 (ABR-1)
• Diameter, lower section: .276” / 7.0mm
• Flange diameter: .375” / 9.5mm
• Flange thickness: .061” / 1.55mm
• Thumbwheels: Diameter: .63″/16mm, Thickness: .11″/2.8mm

Tone-Lock™ Lock Nuts – Pair of 6-32 (ABR-1) lock nuts

Lock Nut/Tailpiece Stud Tool – Corsa Faber Locknut Tool