Recovery Effects Dirty Murals hand-wired Tape Echo Delay with expression pedal inputs
This point to point hand-wired delay really preserves the frequency profile of whatever you plug into it so if the effect mix is set to zero you'll struggle to tell the difference between on and off. It doesn't naturally darken or compress your source signal like some delays do.
Once you start adding in the effect you'll hear a very nicely voiced tape-style delay. The first repeat is clear and then subsequent repeats degrade and trail away in a very pleasant way. I find the tone of the repeats to sit right in that sweet spot between the murkier analog sounds and the brighter, almost chirpy, digital tones of other pedals.
The footswitches or "satellites" may seem confusing so let me try to explain. Basically, with most EXP pedal ports on a delay once you plug in the EXP pedal itself then you're obligated to use the pedal to control whichever parameter it is programmed to control. The knob for that parameter then helps set either the minimum or maximum of your EXP pedal's sweep.
Here, by contrast, you can plug in both a Time EXP pedal and a separate Feedback EXP pedal and they will be completely inactive until you engage the "satellite" footswitch that corresponds to that pedal.
Once you do engage the "satellite" footswitch then the EXP pedal becomes active but in this case the knob setting has no bearing on the sweep of the EXP pedal. So you can have whatever setting you like for time and feedback on the knobs and then engage the expression pedal to suddenly shift to a different setting and enable EXP control.
You could probably get one or two of those smaller TRS boxes with a knob instead from companies like loopmaster or T1M if you wanted to make use of this preset without needing to spend quite as much on more expression pedals (this setup would work if you just wanted to use the satellite switch to toggle between the two settings and didn't care as much to have heel-toe control over anything).
Cool aesthetic. No blemishes I can find (check the pictures) and fully functional (lifetime warranty from the builder too). These are about $330 new and there aren't so many of them out there.
Here's the information from the builder:
DIRTY MURALS MKII
Hand-Wired Echo with Advanced Control Features
Natural sounding tape-like echo, with analog direct signal path. It sounds like a classic tape echo unit, and has advanced expression pedal options that can be utilized with a standard expression pedal, like the Moog EP-2.
The basic functions are delay time, feedback, mix, and drive. In addition to controlling the delay time and feedback with your expression pedal, you can toggle back and forth between the setting on the pedal and those on the expression pedal.
Dirty Murals is point-to-point hand-wired, with no printed circuit board. True bypass, chrome plated LED. lead-free solder, and U.S.A. parts whenever possible. It operates on a single 9 volt battery or industry standard negative center, 2.1 barrel regulated power supply. It includes a full-lifetime warranty.
Once you start adding in the effect you'll hear a very nicely voiced tape-style delay. The first repeat is clear and then subsequent repeats degrade and trail away in a very pleasant way. I find the tone of the repeats to sit right in that sweet spot between the murkier analog sounds and the brighter, almost chirpy, digital tones of other pedals.
The footswitches or "satellites" may seem confusing so let me try to explain. Basically, with most EXP pedal ports on a delay once you plug in the EXP pedal itself then you're obligated to use the pedal to control whichever parameter it is programmed to control. The knob for that parameter then helps set either the minimum or maximum of your EXP pedal's sweep.
Here, by contrast, you can plug in both a Time EXP pedal and a separate Feedback EXP pedal and they will be completely inactive until you engage the "satellite" footswitch that corresponds to that pedal.
Once you do engage the "satellite" footswitch then the EXP pedal becomes active but in this case the knob setting has no bearing on the sweep of the EXP pedal. So you can have whatever setting you like for time and feedback on the knobs and then engage the expression pedal to suddenly shift to a different setting and enable EXP control.
You could probably get one or two of those smaller TRS boxes with a knob instead from companies like loopmaster or T1M if you wanted to make use of this preset without needing to spend quite as much on more expression pedals (this setup would work if you just wanted to use the satellite switch to toggle between the two settings and didn't care as much to have heel-toe control over anything).
Cool aesthetic. No blemishes I can find (check the pictures) and fully functional (lifetime warranty from the builder too). These are about $330 new and there aren't so many of them out there.
Here's the information from the builder:
DIRTY MURALS MKII
Hand-Wired Echo with Advanced Control Features
Natural sounding tape-like echo, with analog direct signal path. It sounds like a classic tape echo unit, and has advanced expression pedal options that can be utilized with a standard expression pedal, like the Moog EP-2.
The basic functions are delay time, feedback, mix, and drive. In addition to controlling the delay time and feedback with your expression pedal, you can toggle back and forth between the setting on the pedal and those on the expression pedal.
Dirty Murals is point-to-point hand-wired, with no printed circuit board. True bypass, chrome plated LED. lead-free solder, and U.S.A. parts whenever possible. It operates on a single 9 volt battery or industry standard negative center, 2.1 barrel regulated power supply. It includes a full-lifetime warranty.
Reverb-Käuferschutz
Reverb hilft dir weiter, wenn dein Artikel verloren geht, beschädigt ist oder nicht der Beschreibung entspricht. Melde alle Probleme einfach innerhalb von 7 Tagen und wir verhelfen dir zu einer vollständigen Rückerstattung.Erfahre mehr über den Reverb-Käuferschutz.
| Inseriert | vor 10 Jahren |
|---|---|
| Zustand | Neuwertig (Gebraucht) Neuwertige Artikel sind generell in fast neuem Zustand, aber wurden geöffnet oder gespielt bzw. benutzt.Weitere Informationen |
| Marke | |
| Modell |
|
| Kategorien | |
| Jahr |
|
| Hergestellt in |
|
Möglicherweise sind hier Informationen zur Produktsicherheit verfügbar.


