The Audio Technica AT2050 Microphone provides consistent, superior performance in switchable cardioid, omnidirectional and figure-of-eight polar pattern settings. Its dual large diaphragms are gold-vaporized and aged to achieve optimum characteristics over years of use. Equipped with a switchable 80 Hz high-pass filter and 10 dB pad, the Audio Technica AT2050 Microphone is ideal for studio and live sound use on vocals, piano, strings, drum overheads, guitar amps, and more.

• Three switchable polar patterns: omni, cardioid, figure-of-eight
• Switchable 80 Hz high-pass filter and 10 dB pad
• Large diaphragm for smooth, natural sound and low noise
• State-of-the-art surface-mount electronics ensure compliance with A-T’s stringent consistency and reliability standards

• Element: Externally-Polarized (DC Bias) Condenser
• Polar Patterns: Cardioid, Omnidirectional, Figure-of-Eight
• Frequency Response: 20-20,000 Hz
• Low Frequency Roll-Off: 80 Hz, 12 dB/Octave
• Open Circuit Sensitivity: –42 dB (7.9 mV) re 1V at 1 Pa
• Impedance: 120 Ohms
• Maximum Input Sound Level: 149 dB SPL, 1 kHz at 1% THD; 159 dB SPL, with 10 dB Pad (Nominal)
• Noise: 17 dB SPL
• Dynamic Range (Typical): 132 dB, 1 kHz at Max SPL
• Signal-To-Noise Ratio: 77 dB, 1 kHz at 1 Pa
• Phantom Power Requirements: 11-52V DC, 4.7 mA Typical
• Switches: Polar Selection; Flat, Roll-Off; 10 dB Pad (Nominal)
• Weight: 412 g (14.5 oz)
• Dimensions: 170.0 mm (6.69") Long, 52.0 mm (2.05") Maximum Body Diameter
• Output Connectors: Integral 3-Pin XLRM-Type
• Audio-Technica Case Style: R5

• Audio Technica AT2050 Microphone
• Audio Technica AT8458 Shock Mount for 5/8"-27 Threaded Stands
• 5/8"-27 to 3/8"-16 Threaded Adapter
• Soft Protective Pouch
• 2 Year Warranty