The repeats (4) control the regeneration of the delay signal. When the repeat control is set to maximum, you'll get endless reps without uncontrollable self-oscillation, making it ideal for creating drones, composing the ultimate post-rock guitar sound with no feedback, or just having fun.

To use the Dispatch Master as a delay only:

Turn down the reverb control completely

Adjust the Time, Repeats and Mix controls to your liking

To use the Dispatch Master as a reverb only:

Completely turn down time and repeat controls

Adjust the Reverb and Mix controls to your liking

IT IS IMPORTANT! In Reverb mode only, the Repeats control has a secondary function. It can be used to adjust the decay, depth and tonal quality of the reverb! Crank it up for more dynamics and a thicker sound.

Dimensions: 4.75 x 2.50 x 2.25 in (121 x 64 x 57 mm) with buttons
Current draw: 78 mA
Input impedance: 1 MΩ
Output impedance: <1 kΩ
Flexi-Switch® technology

This device is equipped with Flexi-Switch® technology! This relay-based true bypass switching style allows you to use momentary and latching style switching simultaneously.

For a standard lock-out operation, press the foot switch once to activate the effect, then press again to bypass.

For momentary operation, hold the pedal down for as long as you want to use the effect. Once you release the switch, the effect is bypassed.

Since switching is relay-based, it requires power to pass the signal.
Power

This device takes a standard 9 volt DC power supply with a negative 2.1mm center barrel. We always recommend foot-specific transformer isolated wall power supplies or isolated multiple output power supplies. The pedals will make extra noise if there is ripple or dirty power. Switching power supplies, daisy chain power supplies, and non-pedal specific power supplies also don't filter out dirty power and let unwanted noise pass through. DO NOT OPERATE AT HIGHER VOLTAGES!