Avalanche Run ™
Reverb and stereo delay with Tap Tempo
The Avalanche Run is a dream stereosonic exploration multi-tool that features up to 2 seconds of delay, inverted delay, tap tempo with subdivision control, switchable true bypass or buffered bypass with 5 tail lengths different styles (including a sound style on its lo-fi looping mode) and an assignable expression control that maps the expression take to a control of your choice, including the toggle! The delay section allows switching from tape emulation to bucket brigade styles with a twist of the wide range tone control. The cavernous plate-style reverb has just a touch of modulation similar to that found in our precious Dispatch Master, but more lush with an adjustable Decay. Anotherworldly reverse delay and dynamically pumping reverb settings are accessible via a 3-way toggle switch. And that's just the beginning...

1. Time: This controls the delay time and ranges from 0ms to just under 2000ms.

2. Repeats: Controls delay regeneration, from zero repetitions to almost infinity.

3. Tone: Controls the tone of the delay line only. Eliminate the highs to the left, lower the lows to the right, and get a flat response in the middle.

4. Mix: this is the volume control of the delay line. This mixes in the wet with the dry until 1am, 1am to 3am amplifies the wet-on-dry signal and 3h upwards brings the dry down until it is completely wet when all the way up .

5. Expression socket assignment switch: Use this switch to map the expression socket to one of the assigned controls.

Decay: controls the decay time of the reverb

R Mix: controls the reverb mix

Time: This replaces the delay time control and is RADICALLY different from the interface control. Using the expression pedal to control the beat will give you all kinds of wild effects that cannot be achieved by turning the knob.

Repeats: controls the repeats of the delay

D Mix: controls the delay mix

Toggle: This takes over from the toggle switch and will switch from forward delay in heel down position to reverse delay in tip down position.

6. Ratio Selector: Selects the delay subdivisions when the time is set by the “Tap” switch.

1/1: black

3/4: Dotted 8th

2/3: Quarter note

1/2: eighth note

1/3: eighth note triplet

1/4: sixteenth note

7. Decay: Controls the duration of the reverb decay, a short counterclockwise decay, a long cavernous clockwise decay.

8. Rocker switch (mode selector)

Normal: This is the “standard” delay and reverb mode

Reverse: this is the reverse delay mode with a "standard" reverb

Swell: this is the mode of volume swelling

9. Mix: This is the volume control of the reverb. Mixes in wet with dry for up to 1 hour, 1 hour to 3 hours boosts wet signal on dry and 3 hours up reduces dry until completely wet when it is on top.