The TEXAS TONE™ 30 is another 'inspired by' all-tube guitar amplifier, in this case inspired by the tweed Bassman, it's near-twin the JTM45, and the black-faced Pro, with some important changes.
Bright channel replaced with a Lead channel, with changes to the gain and frequency response to allow for a bit more drive for rock leads, with or without pedals.
The Presence control has been supplanted by a Voicing control that is much more subtle. The output section is more like a black-faced mid 1960s amp, with a wide-range, higher gain phase inverter.
The result is a loud, versatile combo amp with a single 12" vintage voiced Eminence speaker, that can play clean or get great rock tone. As usual, the noise floor of the TEXAS TONE™ 30 is quite low, designed for, and resulting in, reduced hum and hiss.
The TEXAS TONE™ 30 includes the features listed below:
Isolated Standby switch
MIL-Spec wire
Low-noise resistors
Shielded signal cables
High-quality JJ and Mallory Capacitors
Hand-wired turret board
Eminence special design 12" speaker
Texas Tone™ Amps are built with a discerning musician's care. Every component, every wire lead, every solder joint, is carefully selected, laid out, bent, and soldered to ensure long life, optimal tone, and low noise. To further reduce amp hum, they follow modern electrical engineering practice and use a modified single point grounding scheme.
Texas Tone 30
The Blumentritt Amplification Texas Tone 30™ all tube guitar amplifier retails for $1,895.00 but you can get this excellent condition amp for much less.
Video of me demo'ing this exact amp:
Bright channel replaced with a Lead channel, with changes to the gain and frequency response to allow for a bit more drive for rock leads, with or without pedals.
The Presence control has been supplanted by a Voicing control that is much more subtle. The output section is more like a black-faced mid 1960s amp, with a wide-range, higher gain phase inverter.
The result is a loud, versatile combo amp with a single 12" vintage voiced Eminence speaker, that can play clean or get great rock tone. As usual, the noise floor of the TEXAS TONE™ 30 is quite low, designed for, and resulting in, reduced hum and hiss.
The TEXAS TONE™ 30 includes the features listed below:
Isolated Standby switch
MIL-Spec wire
Low-noise resistors
Shielded signal cables
High-quality JJ and Mallory Capacitors
Hand-wired turret board
Eminence special design 12" speaker
Texas Tone™ Amps are built with a discerning musician's care. Every component, every wire lead, every solder joint, is carefully selected, laid out, bent, and soldered to ensure long life, optimal tone, and low noise. To further reduce amp hum, they follow modern electrical engineering practice and use a modified single point grounding scheme.
Texas Tone 30
The Blumentritt Amplification Texas Tone 30™ all tube guitar amplifier retails for $1,895.00 but you can get this excellent condition amp for much less.
Video of me demo'ing this exact amp:
Reverb Buyer Protection
Reverb has your back if your item is lost, damaged, or doesn't match its description. Simply report any issues within 7 days and we'll help you get a full refund.Learn more about Reverb Buyer Protection.
| Listed | 5 years ago |
|---|---|
| Condition | Excellent (Used) Excellent items are almost entirely free from blemishes and other visual defects and have been played or used with the utmost care.Learn more |
| Brand | |
| Model |
|
| Finish |
|
| Categories | |
| Year |
|
| Made In |
|
Product safety information may be available here.






