Red Sound Systems Red Sound Systems Voyager 1 Sampler Looper Synchro MIDI Turntable Synth Drum Machi

NEW OLD STOCK

Device that recognises tempo from audio signal and turns it into MIDI signal.

For example you can synchronise two turntables with a synth or a drum machine.

VOYAGER 1 analyzes audio signals from vinyl, CD or tape and calculates the BPM of two tracks simultaneously. Both BPMs are displayed but, more importantly, the beat information from one channel is used to generate a MIDI Clock signal, which runs in synchronization with the audio track.

In original box and comes with manual.

FEATURES:
• Performance: BPM Range = 60 - 230 BPM Audio/MIDI synchronisation delay = less than 3mS
• Lock-in time = 2 to 4 sec's (from introduction of
readable beat information).
• Displays: 2 x 7 Segments, 3 character (LED). 1 x MIDI Clock rotating display (8 x LED's). Beat Tracking indicator (3 x LED's).
• Controls: Channel 1 select, Channel 2 select, Run/Pause, Cue, Beat. One Re-Set, Tap (Stop) Tempo edit, Sync Pull/Push adjust.
• MIDI Implementation: System Real Time/Clock commands = Transmitted.
• Connectors: Channel 1 Input/Output, Channel 2 Input/Output, MIDI Clock Out, AC adaptor.
• Power Supply: 9vDC, 250mA (RED PSU) included.
• Dimensions/Weight 180(W) x 132(D) x 50(H) mm, 1.65 Kg.
• Intelligent Software: Constantly analyses and
calculates the BPM of two audio inputs (vinyl or CD/tape).
• Channel 1 & 2 Displays: The BPM readings from the audio inputs are shown clearly on 3 digit
LED displays.
• Run/Pause Button: Controls the running status of the external MIDI sequencer.
• Cue Button: Pre-sets the VOYAGER 1 to the BPM of your next audio track prior to performance.
• The MIDI sequencer and audio track can then be started simultaneously from a predetermined cue point in the audio track.
• Beat One Reset Button: Re-aligns the start point (beat1/bar1) of the current pattern in the MIDI sequencer with any chosen point in the audio track.
• MIDI Clock Display: 8 LED display rotates' at the detected BPM rate when the VOYAGER 1 is in RUN mode.
• Beat Tracking Indicator: 3 LED display shows any beat synchronisation adjustments made by the VOYAGER 1.
• Tap (Stop) Button: Used to manually enter a BPM and/or STOP the MIDI Clock.