Atlas IED FAP62T-USA PRE-ASSEMBLED STRATEGY I SERIES 6 LOUDSPEAKER PACKAGE MEETS

Manufactured under Buy America Standards in Ennis TX, the FAP62T-USA 6" speaker package features a low-profile design that delivers high-intelligibility voice, music, and signal reproduction to a wide variety of applications. The individual package components are all UL (Underwriters Laboratory) listed for general signaling and plenum ceiling installations.

The 2-way coaxial configuration produces 35W of true, clear audio reproduction across 70V line systems with power taps at 1, 2, 4, & 8 Watts. An even dispersion pattern combined with a low-profile design makes the FAP62T ideal for installations where low ceilings are a reality.

Atlas IED FAP62T-USA Includes:

• FAP62T-USA 6" speaker

Atlas IED FAP62T-USA Features:

• 4 Pole Detachable "Phoenix" Style Connector Allows Easy Pre-Wiring and is Convenient for Daisy Chaining Additional Strategy Full Range Speakers or Subwoofers
• Easy Installation in Drop Tile or Sheetrock Ceilings via C-ring/V-rail Tile Bridge and "Dog Leg" Mounting System (Included)
• Enhanced Quality 70.7V/100V Internal Transformers Minimize Insertion Loss and Maintain Low Frequency Response While Providing increased Output for Higher SPL Applications
• Extended Low Frequency Response from the 285 Cubic Inch Optimally Tuned and Ported Deep Drawn Galvanized Steel Enclosure
• Front Mounted Tap Selector Switch for Easy System Tuning Adjustments Includes Transformer Bypass Setting for 8 ohm Direct Coupled Operation
• "Press Fit" Grilles Blend Better into Contemporary Architecture
• Unique "Trap Door" Input Section Allows for Through Conduit Runs with Rigid or Flex Conduit

Atlas IED FAP62T-USA Specifications:

• Power Rating: 50 Watts
• Transformer Taps: 2, 4, 8, 16, & 32 Watts & 8Ω Bypass
• Frequency Response: 63Hz – 20kHz (±7dB)
• Sensitivity (1W / 1M): 88dB
• Woofer: 6" Poly Cone with Butyl Rubber Surround
• Woofer Magnet Weight: 14 oz (398g)
• Enclosure Volume: 475 in3
• HF Driver: 19mm Coaxially Mounted PEI Dome Tweeter
• Diameter: 12.5" (318mm)
• Overall Height: 8.48" (215mm)
• Cut-out Dimensions: 11" (279mm)