Handmade Telecaster with Nitrocellulose Trans Red Finish
This is a telecaster-style guitar made in my home workshop in the suburbs of Detroit Michigan USA. I have used it myself for about a year, and it has some flaws and battle scars, but is an all around great instrument which plays beautifully, and features one of a kind workmanship and quality components.
Materials
The body is made of Northern Ash. It is a very dense wood which leads to a heavy guitar (near 10lbs) with a lot of bite, sustain, and treble high end. The maple neck and fingerboard are adorned with classic black dots, and a two way truss rod accessible at the neck heel. The whole guitar is covered in a thin nitrocellulose lacquer.
Electronics
An over-wound telecaster bridge and PAF style neck humbucker (both from the GFS professional series). Wired in the traditional (1 Volume, 1 Tone, and a 3-way switch) telecaster arrangement with super smooth Bourns audio pots.
Disclosure
I am a hobby builder, not a factory, or professional luthier. Especially since this was one of my early efforts, mistakes were made, and are visible in the photos. The finish has worn through in a few spots, including the inside horn, and area near the strap buttons where some stubborn screws were filed down. The body has a few errant bandsaw cuts which are visible through the transparent finish. There is also a ding on the bottom which reveals some wood filler by the binding. While it isn't a showroom piece, it is a great player, and already carries some of that road worn vibe.
Specs
Body: Northern Hard Ash
Finish: Trans-red nitrocellulose lacquer covered in clear nitrocellulose lacquer
Neck Joint: Bolt-On
Neck: Maple
Neck Profile: "Standard C" with clear nitro finish
Scale Length: 25.5"
Truss Rod: Two-Way vintage nut at heel
Fretboard: Maple with dot inlays
Frets: 21 nickel silver frets leveled, crowned, and poslished by hand
Nut: Hand-cut Bleached Bone
Bridge: Wilkinson Telecaster-style with brass saddles (Through body stringing)
Tuners: Wilkinson Vintage 6-in line
Electronics: 1 Vol, 1 Tone, 3-way switch (250k Bourns audio pots)
Pickups: GFS Professional "hotter wound" telecaster bridge (7k), GFS Professional series PAF-style humbucker (8k)
Weight: 10lb (approx)
Shipping
I will ship this guitar for free to the continental United States, international buyers contact for a shipping quote.
Custom Work
If you would like a handmade guitar, but aren't sold on this listing send me a message. I would love to build you a great guitar with your choice of finish in any number of classic body styles.
Materials
The body is made of Northern Ash. It is a very dense wood which leads to a heavy guitar (near 10lbs) with a lot of bite, sustain, and treble high end. The maple neck and fingerboard are adorned with classic black dots, and a two way truss rod accessible at the neck heel. The whole guitar is covered in a thin nitrocellulose lacquer.
Electronics
An over-wound telecaster bridge and PAF style neck humbucker (both from the GFS professional series). Wired in the traditional (1 Volume, 1 Tone, and a 3-way switch) telecaster arrangement with super smooth Bourns audio pots.
Disclosure
I am a hobby builder, not a factory, or professional luthier. Especially since this was one of my early efforts, mistakes were made, and are visible in the photos. The finish has worn through in a few spots, including the inside horn, and area near the strap buttons where some stubborn screws were filed down. The body has a few errant bandsaw cuts which are visible through the transparent finish. There is also a ding on the bottom which reveals some wood filler by the binding. While it isn't a showroom piece, it is a great player, and already carries some of that road worn vibe.
Specs
Body: Northern Hard Ash
Finish: Trans-red nitrocellulose lacquer covered in clear nitrocellulose lacquer
Neck Joint: Bolt-On
Neck: Maple
Neck Profile: "Standard C" with clear nitro finish
Scale Length: 25.5"
Truss Rod: Two-Way vintage nut at heel
Fretboard: Maple with dot inlays
Frets: 21 nickel silver frets leveled, crowned, and poslished by hand
Nut: Hand-cut Bleached Bone
Bridge: Wilkinson Telecaster-style with brass saddles (Through body stringing)
Tuners: Wilkinson Vintage 6-in line
Electronics: 1 Vol, 1 Tone, 3-way switch (250k Bourns audio pots)
Pickups: GFS Professional "hotter wound" telecaster bridge (7k), GFS Professional series PAF-style humbucker (8k)
Weight: 10lb (approx)
Shipping
I will ship this guitar for free to the continental United States, international buyers contact for a shipping quote.
Custom Work
If you would like a handmade guitar, but aren't sold on this listing send me a message. I would love to build you a great guitar with your choice of finish in any number of classic body styles.
Reverb-Käuferschutz
Reverb hilft dir weiter, wenn dein Artikel verloren geht, beschädigt ist oder nicht der Beschreibung entspricht. Melde alle Probleme einfach innerhalb von 7 Tagen und wir verhelfen dir zu einer vollständigen Rückerstattung.Erfahre mehr über den Reverb-Käuferschutz.
| Inseriert | vor 10 Jahren |
|---|---|
| Zustand | Gut (Gebraucht) Artikel mit Zustand Gut funktionieren einwandfrei, können aber einiges an Makeln oder Spielspuren aufweisen.Weitere Informationen |
| Marke | |
| Modell |
|
| Farbe |
|
| Kategorien | |
| Jahr |
|
| Hergestellt in |
|
| Korpusform |
|
Möglicherweise sind hier Informationen zur Produktsicherheit verfügbar.

