ObsidianWire ST Blender 500k CUSTOM BLENDER FOR STRAT
This listing has ended
See similar gear from other Reverb sellers
Our users rate Reverb
✔ Solder-less Install
✔ Solder-less Pickup Changes
✔ Play Neck + Bridge Together
✔ Master Tone & Volume Control
✔ Fits Fender® Strat®
✔ Fits Squier® Strat® with Adjustments
SUPER EASY, SOLDER-LESS INSTALL
All ObsidianWire Pro-Wired Electronics are super easy to install, and allow for solder-less pickup changes with ObsidianWire Plug, Play & Enjoy connectors.
OBSIDIANWIRE CUSTOM BLENDER FOR STRAT®
PLAY YOUR NECK AND BRIDGE PICKUPS TOGETHER
The ObsidianWire Custom Blender for Strat® is the solder-less wiring harness, with famous Stratocaster® blender mod built in.
With a master volume and master tone control the Custom Blender Harness packs your traditional Strat® tones into a smaller space, leaving the third tone control free.
This becomes the blender control, adding the ability to blend the neck and bridge pickups in together. This is amazing for adding a range of musical mids to your lead tone (like the bell like effects David Gilmour gets in his signature Strat) or for adding some twang to your rhythm, just like you find in the middle position on a Tele®. When you need a complete wall of sound, you can even mix all three pickups together by flicking the five way switch to position 2 or 4.
STRAT® BLENDER MOD CONTROLS
SWITCH POSITIONS BLENDER CONTROL ON (POSITION 1)
1: Bridge + Neck
2: Bridge & Middle + Neck
3: Middle
4: Neck & Middle + Bridge
5: Neck + Bridge
When it is time to ease back to your traditional switch positions, simply roll the blender knob off, and it will remove itself completely from the circuit.
SWITCH POSITIONS BLENDER CONTROL OFF (POSITION 10):
1: Bridge Pickup
2: Bridge & Middle Pickup
3: Middle Pickup
4: Neck & Middle Pickup
5: Neck Pickup
CONTROL LAYOUT
Switch: 5 - Way
Control 1: Master Volume
Control 2: Master Tone (All three pickups)
Control 3: Blender Control (Adds Neck or Bridge)
THE BUILD
We have a small team of people that love crafting Pro-Wired Electronics and we take pride in producing the absolutes best. We use custom specified parts, perfected techniques, and hand test to ensure that your harness will be an upgrade for your guitar, from factory model to custom shop.
CRYSTAL CLEAR TONE
To make your tone crystal clear at lower volumes we also include an ObsidianWire Custom Spec Treble Bleed Mod. This prevents tone muddiness at low volumes by allowing high frequencies to pass along a separate path to your amp, rather than being stopped short by the increasing resistance at the volume control.
WORLD’S BEST CRAFTSMANSHIP AND COMPONENTS
COMPONENTS
Potentiometers: Obsidian Custom CTS Pots 500K (+/-10%) Split Shaft / 24 Spline
Capacitors: (150 Series Polyester Film 0.022UF) (+/-5%)
Switch: Genuine Oak 5 Way Switch
Jack: Pro-Wired Switchcraft J11 Mono
COMPATIBILITY
Fits: Fender® Stratocaster® - Direct Fit // Right Hand Guitar Only
Fits: Squier® Stratocaster® - Widen Control holes to 10mm & replace knobs
Knobs: Requires US spec 24 spline knobs
Does NOT fit: Left Handed Guitars // Any guitar not described above
The Solder-less Strat Blender Wiring Mod
✔ Solder-less Install
✔ Solder-less Pickup Changes
✔ Play Neck + Bridge Together
✔ Master Tone & Volume Control
✔ Fits Fender® Strat®
✔ Fits Squier® Strat® with Adjustments
SUPER EASY, SOLDER-LESS INSTALL
All ObsidianWire Pro-Wired Electronics are super easy to install, and allow for solder-less pickup changes with ObsidianWire Plug, Play & Enjoy connectors.
OBSIDIANWIRE CUSTOM BLENDER FOR STRAT®
PLAY YOUR NECK AND BRIDGE PICKUPS TOGETHER
The ObsidianWire Custom Blender for Strat® is the solder-less wiring harness, with famous Stratocaster® blender mod built in.
With a master volume and master tone control the Custom Blender Harness packs your traditional Strat® tones into a smaller space, leaving the third tone control free.
This becomes the blender control, adding the ability to blend the neck and bridge pickups in together. This is amazing for adding a range of musical mids to your lead tone (like the bell like effects David Gilmour gets in his signature Strat) or for adding some twang to your rhythm, just like you find in the middle position on a Tele®. When you need a complete wall of sound, you can even mix all three pickups together by flicking the five way switch to position 2 or 4.
STRAT® BLENDER MOD CONTROLS
SWITCH POSITIONS BLENDER CONTROL ON (POSITION 1)
1: Bridge + Neck
2: Bridge & Middle + Neck
3: Middle
4: Neck & Middle + Bridge
5: Neck + Bridge
When it is time to ease back to your traditional switch positions, simply roll the blender knob off, and it will remove itself completely from the circuit.
SWITCH POSITIONS BLENDER CONTROL OFF (POSITION 10):
1: Bridge Pickup
2: Bridge & Middle Pickup
3: Middle Pickup
4: Neck & Middle Pickup
5: Neck Pickup
CONTROL LAYOUT
Switch: 5 - Way
Control 1: Master Volume
Control 2: Master Tone (All three pickups)
Control 3: Blender Control (Adds Neck or Bridge)
THE BUILD
We have a small team of people that love crafting Pro-Wired Electronics and we take pride in producing the absolutes best. We use custom specified parts, perfected techniques, and hand test to ensure that your harness will be an upgrade for your guitar, from factory model to custom shop.
CRYSTAL CLEAR TONE
To make your tone crystal clear at lower volumes we also include an ObsidianWire Custom Spec Treble Bleed Mod. This prevents tone muddiness at low volumes by allowing high frequencies to pass along a separate path to your amp, rather than being stopped short by the increasing resistance at the volume control.
WORLD’S BEST CRAFTSMANSHIP AND COMPONENTS
COMPONENTS
Potentiometers: Obsidian Custom CTS Pots 500K (+/-10%) Split Shaft / 24 Spline
Capacitors: (150 Series Polyester Film 0.022UF) (+/-5%)
Switch: Genuine Oak 5 Way Switch
Jack: Pro-Wired Switchcraft J11 Mono
COMPATIBILITY
Fits: Fender® Stratocaster® - Direct Fit // Right Hand Guitar Only
Fits: Squier® Stratocaster® - Widen Control holes to 10mm & replace knobs
Knobs: Requires US spec 24 spline knobs
Does NOT fit: Left Handed Guitars // Any guitar not described above
- Import Taxes:
USA - NO TAXES AT ALL;
EU - around 80$ per every our guitars
(please contact us if you are not familiar with EU import procedure)
Australia - NO TAXES AT ALL;
- Our guitars are professionally set up in our shop
- No issues with rosewood or ebony
Reverb Buyer Protection
Reverb has your back if your item is lost, damaged, or doesn't match its description. Simply report any issues within 7 days and we'll help you get a full refund.Learn more about Reverb Buyer Protection.
| Condition | Brand New (New) Brand New items are sold by an authorized dealer or original builder and include all original packaging.Learn more |
|---|---|
| Brand | |
| Model |
|
| Finish |
|
Product safety information may be available here.