The LCT 940 combines a premium large-diaphragm FET condenser microphone and a top-notch tube microphone in a single housing. Choose between the two main settings of "TUBE" and "FET", or find your sweet spot in between - they are mixable at any possible ratio.

Type: Condenser, externally polarized
Acoustical Operating Principle: Pressure gradient transducer
Transducer: 25.4 mm, 1 in
Polar Pattern: Omni, wide cardioid, cardioid, supercardioid, figure-8, four intermediate patterns
Frequency Range: 20 - 20,000 Hz
Sensitivity:
23 mV/Pa, -33 dBV/Pa (cardioid)
20 mV/Pa, -34 dBV/Pa (omni)
23 mV/Pa, -33 dBV/Pa (figure-8)
Equivalent Noise Level (FET):
8 dB (A), cardioid
9 dB (A), omni
8 dB (A), figure-8
Equivalent Noise Level (Tube):
12 dB (A), cardioid
13 dB (A), omni
12 dB (A), figure-8
Max. SPL for 0.5 % THD (FET): 143 dBSPL, 0 dB pre-attenuation
Max. SPL for 0.5% THD (Tube): 140 dBSPL, 0 dB pre-attenuation
Signal / Noise Ratio (FET): 86 dB (A)
Signal / Noise Ratio (Tube): 82 dB (A)
Dynamic Range of FET mic. Amp.: 135 dB
Dynamic Range of Tube Mic. Amp.: 128 dB
Pre-Attenuation Pad:
0 dB
-6 dB
-12 dB
-18 dB
Low-Cut Filter: Linear
40 Hz (12 dB/oct)
150 Hz (6 dB/oct)
300 Hz (6 dB/oct)
Internal Impedance: 200 O
Rated Load Impedance: 1,000 O
PSU - Supply Voltage:
- 230 V, 50 Hz
- 110 V, 60 Hz
Current Consumption: 170 mA
Connector: Gold plated 11-pin XLR
Microphone Dimensions: 192 x 60 x 46 mm, 7.5 x 2.4 x 1.8 in
PSU Dimensions: 250 x 150 x 70 mm, 9.8 x 5.9 x 2.8 in
Microphone Net Weight: 662 g, 23.3 oz
PSU Net Weight: 1930 g, 68.1 oz