XIN module is a part of CATOFF MIX analog modular mixing system. This module provides one input mono audio channel with gain control, aux sends controls, channel volume knob, panning knob and muting switch. In addition, there are two jumpers to choose between AUX pre/post level control for both AUX channels on the back side of the module. Еach module has side stacking connection to the XOT master module or to other XIN modules. A lot of XIN modules can be connected to each other and must be combined with one XOT master-module. XIN modules can't be used without XOT module (sold separately or as a part of 4ch Complete Set). Thus, having connected XIN to XIN and finally to XOT, we get a stereo mixing console with as many input channels as we need.
Technical Specifications: Frequency Response: 20Hz to 20kHz +/-0.5dB THD - Total Harmonic Distortion (+4 dBu, 20 Hz–20 kHz, 10kΩ): <0.007% Gain Range: -20db to +20db Line Input Impedance: 10kΩ Line Input Maximum Level: +22dBu Power Usage (via XOT module): 15mA# +12v / 15mA# -12v Width: 4HP Depth: 35mm / from the back side of the front panel 2mm Aluminium Front Panel Power bus socket is not required
Warning: If you bought CATOFF MIX System earlier than 2021 and now want to buy additional XIN modules - the hue and texture of the panels may differ slightly from those purchased previously. Not criticalу but slightly differently and usually not noticeable. This is due to the fact that the panels can be from different parties. Hope for understanding
