Focusrite RedNet X2P 2-Channel 24/96 Microphone Pre, Headphone/Line Out Dante I/O Interface with PoE
Santa Fe Springs, CA, United States
About this listing
RedNet X2P is a compact, portable and robust 2x2 Dante audio interface featuring two Red Evolution mic pres, stereo line out and a stereo headphone amplifier. RedNet X2P allows you to effortless add a high quality Dante audio interface by integrating power, audio, clock and remote control over a single Ethernet cable - simply use a power over Ethernet switch or PoE injector. A local input mixer allows 'more me' monitoring control, while a control lockout mode ensures settings can not be changed when used remotely.\n\nRear panel XLR outputs offer level-controlled analogue outputs of up to 24dBu, while a front panel 1/4" connector provides a high-powered headphone output capable of driving both high and low impedance headphones. A pair of combination XLR/1/4" inputs allow the connection of mic, line or instrument level signals to the mic pres, which include Focusrite's acclaimed Air mode which emulates the sound of our classic input transformers. The top panel features an array of controls: output level for headphone and line outputs, mic pre controls of gain, high-pass filter, Air, phase invert, phantom power and stereo linking; as well as the crossfader for controlling the balance of mic pre inputs and network receiver channels which to be sent to the headphone or line outputs.\nKey Features\n\n\n Stereo 2x2 audio interface for Dante Audio-over-IP networks\n Two Red Evolution mic preamps for mic, line or instrument level inputs\n Power-over-Ethernet supplied: IEEE 802.3af compliant\n Up to 24-bit, 96kHz sampling rates\n Robust steel and aluminium chassis\n Local input mix to allow ‘more-me’ style monitoring for easy foldback control\n Powerful headphone output even with high-impedance headphones\n Local control lockout of mic pre settings, output settings or both\n Up to 24dBu line output levels\n Independent level control of headphone and line outputs\n Mute switch for line output\n Mic stand mount\n Kensington security slot\n Integrated network switch allowing daisy-chaining of network devices\n Brainworx bx_console Focusrite - exclusive plug-in that faithfully captures the sound, feel and styling of the original Focusrite ISA 110 Equalizer and ISA 130 Dynamics Modules.\n\nTechnical Specifications\nGain Range\n0dB to 68dB in 1dB steps\nType\nElectronically Balanced, Zin = 6.2kO\nMax. Input Level\n>+24dBu, min gain\nFrequency Response\n20Hz - 35kHz +/-0.1dB\nTHD + N\n-103dB (0.0007%) @ -1dBFS (@ 24dB Gain)\nEIN\n<-130dBu 'A'-Weighted (typical)\nSignal-To-Noise Ratio\n-120dB 'A'-Weighted (typical), min gain\nCommon-Mode Rejection Ratio\n50/60Hz CMRR: -80dB\nPhantom Power\n+48V, independently switchable per channel.\nHPF\nHigh-Pass Filter (HPF): -3dB @ 80 +/- 3Hz, 12dB/Octave, independently switchable per channel\nAir Mode\n2dB boost at 10kHz and -2dB at 20Hz (ref 1kHz). Input impedance drop to 2.2kO\nInstrument Inputs Gain Range\n0dB to 68dB in 1dB steps\nInstrument Inputs Type\nElectronically Balanced, Zin = 2MO\nInstrument Inputs Max. Input Level\n>+15dBu, min gain\nInstrument Inputs Frequency Response\n20Hz - 35kHz +/-0.1dB\nInstrument Inputs THD + N\n<-100dB (0.001%) @ -1dBFS (@ 16dB Gain)\nInstrument Inputs Signal-To-Noise Ratio\n-118dB 'A'-Weighted (typical), min gain\nInstrument Inputs HPF\nHigh-Pass Filter (HPF): -3dB @ 80 +/- 3Hz, 12dB/Octave, independently switchable per channel\nLine Level Outputs 0 DBFS Reference Levels\n+18 or +24dBu (switchable)\nLine Level Outputs Frequency Response\n20Hz - 35kHz +/-0.1dB\nLine Level Outputs THD + N\n<-104dB (0.0006%) @ -1dBFS\nLine Level Outputs Dynamic Range\n-120dB 'A'-Weighted (typical), 20Hz - 20kHz\nHeadphone Output 0 DBFS Reference Levels\n>+19dBm\nHeadphone Output Frequency Response\n20Hz - 20kHz +/-0.2dB\nHeadphone Output THD + N\n<-103dB (0.0007%) @ -1dBFS\nHeadphone Output Dynamic Range\n117dB 'A'-weighted (typical), 20Hz - 20kHz\nHeadphone Output Impedance\n5O\nHeadphone Impedance\n32O - 600O\nMic/Line Input To Input\n< -72dB; 20Hz - 20kHz (driven channel at -20dBFS)\nMic/Line Input To Output\n< -126dB; 20Hz - 20kHz (driven channel at -20dBFS)\nOutput To Mic/Line Input\n< -159dB; 20Hz - 20kHz (driven channel at -20dBFS)\nOutput To Output\n< -101dB; 20Hz - 20kHz (driven channel at -20dBFS)\nRight To Left\n< -85dB; 20Hz - 20kHz (driven channel at -20dBFS)\nSupported Sample Rates\n44.1 / 48 / 88.2 / 96 kHz (-4% / -0.1% / +0.1% / +4.167%) at 24 bit\nClock Sources\nInternal or from Dante Network Master.\nOutputs Headphone Outputs\n1 x 1/4" stereo jack\nInputs Mic/Line/Inst Inputs\n2 x Locking Combi XLR\nOutputs Line Outputs\n2 x Male XLR\nPSU (PoE And DC)\n1 x PoE (Port 1) Input and 1 x DC 12V Locking Barrel Input Connector.\nNetwork\n2 x etherCON connectors, also compatible with standard RJ45 connectors.\nLCD Screen\n1 x Screen (Status & Metering)\nHeight (Chassis Only)\n47.5mm/ 1.87"\nWidth\n140mm/ 5.51"\nDepth (Chassis Only)\n104mm/ 4.09"\nWeight\n1.04kg\nPower Over Ethernet (PoE)\nComplies with IEEE 802.3af class 0 Power-over-Ethernet standard (PoE A or PoE B compatible)\nDC Power Supply\n1 x 12V 1.2A DC Power Supply.\nPower Consumption\nPoE: 11.0W - DC: 13.32W (When using supplied DC PSU)\nOperating Temperature\nOperates at up to an ambient temperature of 45 degrees Celcius
Price$1,299.99
Free Shipping
Free Shipping
from Santa Fe Springs, CA
14-Day Return Policy
Enjoy peace of mind with your new gear
