Fender Fender M-80 2-Channel 80-Watt 4x12" Solid State Guitar Combo 1990 Grey

Edit (04/21/2020)
I've recently found time and tools to fix up a few issues the amp was having. I cleaned up the pots and am waiting for the last bit of Deoxit to arrive, along with the other electronics everything is in great condition. I've tightened up and cleaned up some of the loose input and output jacks, and also managed to get most of the small stains removed. All in all, I'm going to keep tinkering with it to up the quality and price when I can. 

This was a great road and studio amp , I could fill any space, I could have both my heavy Bass VI and my low-tuned guitar in at the same time with no problems about blowing the amp. Very loud, great classic sound, I would use the amp for all kinds of recording to add some warmth. Because of the stereo nature of this amp and cab, you can do a lot of different setups. Foot pedal included. 

It was used before I got it. There is one small stain from the previous owner but nothing noticeable and it's covered by the amp head. One of the plastic protective corner casings has a crack in it but it's not loose and still holds just fine.

If you have any questions please feel free to ask and I'll answer promptly. 

Specifications from Fender

Input Impedance: input 1- Greater than 1 meg Ohm ; input 2- 65k Ohm
Nominal level: input 1- 100 mv ; input 2- 200 mv
Power output: 65 Watts RMS per channel (130 Watts RMS)
Rated load impedance: 8 ohms per channel
Mono Effects Loop: Nominal level- -10dBv
                                Send output impedance- 1k Ohm
                                Return input impedance- 30k Ohm
Stereo Effects Loop: Nominal level- -10dBv
                                 Send output impedance- 1k Ohm
                                 Return input impedance- 50k Ohm
            (specifications for each channel: Left on tip, right on ring)
Power Requirements: 120V AC 60Hz., 3.33 Amps Max

Speaker Complement: 2 8 Ohm Fender Special Design 12" speakers (Cab)