Audio Technica ATW-901a/H Wireless Headset Microphone Mic + Samson Headphones

New Page 1 Package Includes:

• (1) Audio Technica ATW-901a/H Wireless Headset Microphone Mic 169.505 - 171.905 MHz
• (1) Rockville PRO-M50 Studio Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad

Authorized Audio Technica Dealer! 

Description of ATW-901a/H:

Audio-Technica's System 9 is a four-channel frequency-agile wireless system designed to provide rock-solid performance along with easy setup and clear, natural sound quality. Featuring sleek, stackable, contemporary styling, System 9 is available in a head worn configurations. The system offers four compatible user-switchable VHF channels.

Each System 9 configuration includes the ATW-R900a receiver and either a body-pack transmitter or handheld microphone/transmitter. The ATW-R900a is a non-diversity, single-channel receiver with advanced dipole antenna design for extended operating range, which improves operation by providing a ground element in addition to the usual signal element. The ATW-R900a also offers volume control along with AF Peak, RF and Power indicator lights.

Features:

• Audio Technica ATW-901a/H Wireless Headset Microphone Mic 169.505 - 171.905 MHz
• Easy Operation and Clear, Natural Sound Quality
• 4 Selectable Frequency-Coordinated VHF Channels
• Balanced XLR and Unbalanced 1/4" Output Jacks enable use with a wide variety of audio gear
• Reliable performance and durable construction
• Advanced dipole antenna system for extended operating rang
• Operating Frequencies: VHF High Band, 169 MHz to 172 MHz
• Modulation Mode: FM
• Maximum Deviation: +/- 10 kHz
• Dynamic Range: >/= 90dB (A-Weighted), typical
• Total Harmonic Distortion: < 1% (at 1 kHz, +/- 10 kHz deviation)
• Operating Range: 200' feet
• Operating Temperature Range: 40° F - 110° F
• Frequency Response: 80 Hz - 13 kHz

Receiver Specifications:

• Receiving System: Non-diversity, single-channel, dual antenna system
• Image Rejection: 50 dB minimum
• RF Sensitivity: 20 dBuV at 60 dB S/N ratio (50 ohms termination)
• Audio Output: Nominal Output Level
  • XLR, balanced: 350 mV (1 kHz modulation, 10 kHz deviation, 100k ohm load)
  • 1/4" (6.3 mm), unbalanced: 700 mV (1 kHz modulation, 10 kHz deviation, 100k ohm load)
• Power Supply: 100-240V AC (50/60 Hz) to 12V DC .5A (center positive) switched mode external power supply
• Dimensions (W x H x D): 7.48" x 1.82" x 5.06" inches
• Net Weight: 12.0 oz
• Accessory Included: Power Supply

Body-Pack Transmitter Specifications:

• RF Power Output: 10 mW
• Spurious Emissions: Following federal and national regulations
• Input Connections: Four-pin Locking Connector
  • Pin 1: GND
  • Pin 2: INST INPUT
  • Pin 3: MIC INPUT
  • Pin 4: DC BIAS +9V
• Batteries: Two 1.5V AA (not included)
• Battery Life: 8 hours (alkaline)
• Dimensions (W x H x D): 2.76" x 4.08" x 0.98" inches
• Net Weight: 2.8 oz.

Includes:

• Pro-m50 headphones
  
• Detachable cable
  
• Soft suede and  leather ear cushions (interchangeable)
  
• Leather hard travel protective case
  
• Gold plated ¼” adapter

Video of PRO-M50:

Rockville brings you studio quality headphones and at an incredible price with its new PRO-M50 headphones. These are professional grade headphones that are guaranteed to ourperform headphones that cost triple the price! These feature ergonomically designed swiveling cups with interchangeable soft suede or leather finish cushions (included). The ear cups seal tight for excellent sound isolation and minimal bleed. Inside these cups you’ll find 40mm Neodymium drivers delivering accurate audio with an extended frequency range for clear and rich bass, and a full frequency range of mids and highs. These are closed back style headphones specifically designed for studio monitoring. These play back the sound with a flat frequency curve so you can hear your music exactly how it was recorded. With the PRO-M50 you can expect to hear every detail of every song with extreme accuracy. These headphones cover full frequency ranges; even extending a bit past the frequencies that the human ear can hear. 

The headband is made of soft leather, offering ultimate comfort even after extended wear. The beautifully designed stainless steel headband frame and arms are strong and durable. A detachable 51” coiled 100% Oxygen Free Copper cable with a gold plated 3.5mm plug is included along with a gold plated ¼” adapter to ensure the best possible signal. A hard leather case is included to store and protect your new investment when you are on the go.

Amazing sound quality will make these your go-to headphones whether in the studio or out and about!  

Features:

• Rockville PRO-M50 Studio Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad 
• Professional High-Definition Studio Headphones
  
• 40mm Neodymium drivers
  
• Ergonomically designed swivel ear cups
  
• Supreme sound isolation
  
• Accurate sound reproduction
  
• Minimal bleed
  
• Sturdy and durable steel headband and arms
  
• Soft leather headband cover
  
• Interchangeable leather and soft suede ear cups covers included
  
• Detachable 51” coil cable made of 100% Oxygen Free Copper (158” fully extended)
  
• Gold plated 3.5mm connector
  
• Gold plated ¼” adapter
  
• Hard leather carrying case
• Stainless steel headband frame and moving arms are durable and long-lasting
  

Specifications:

• Style: Closed-Back
  
• Design: Circumaural
  
• Transducer Type: Dynamic
  
• Driver: 40MM 
  
• Sensitivity: 97±3dB
  
• Impedance: 32ohm
  
• Frequency Response:10Hz – 25KHz
  
• Max. Power: 600MW
  
• Rating Power: 260MW
  
• Net Weight:290g (with cable)