DIY Lefty Iceman Style Bass Guitar Kit Unfinished
BBS-IMSB-L
I do personal quality control so everything should fit together and measure within reason. Its a 100% do-it-yourself project so there will be some level of sanding or fitting.
With direct from China or online orders you run the risk of some parts not fitting together properly. I inspected all of these myself and guarantee if assembled correctly, the guitar will intonate properly and you should have a very nice instrument at the end of the day.
Specific To This Kit:
- Left Handed.
- Bolt-on neck, Scale length is 34", 22 Frets.
- Body is Basswood, Neck is Maple, Fretboard is Rosewood.
- Controls: 2V, 2T
DIY Kit Description:
These kits are of great quality. There are a lot of inferior versions out there. Once received, the quality will speak for itself.
These are great fun to put together and customize. The end result is a one off guitar with your personal touch. All hardware, and electronics are included in the kit (truss-rod, frets, and nut are already installed on the neck). What is NOT included is stain, paint, or finishing material such as sandpaper.
What To Expect To Assemble:
- Finish Sanding and painting of wood. Research how to stain/paint wood for detailed instructions.
- Finish sanding/filing plastic covers.
- All parts bolt/screw together except the electronics need to be soldered (set-necks need to be glued).
- After guitar is assembled you will have to know how (or have someone) to "set-up" the guitar. I.E. Action, truss-rod, intonation.
I do personal quality control so everything should fit together and measure within reason. Its a 100% do-it-yourself project so there will be some level of sanding or fitting.
With direct from China or online orders you run the risk of some parts not fitting together properly. I inspected all of these myself and guarantee if assembled correctly, the guitar will intonate properly and you should have a very nice instrument at the end of the day.
Specific To This Kit:
- Left Handed.
- Bolt-on neck, Scale length is 34", 22 Frets.
- Body is Basswood, Neck is Maple, Fretboard is Rosewood.
- Controls: 2V, 2T
DIY Kit Description:
These kits are of great quality. There are a lot of inferior versions out there. Once received, the quality will speak for itself.
These are great fun to put together and customize. The end result is a one off guitar with your personal touch. All hardware, and electronics are included in the kit (truss-rod, frets, and nut are already installed on the neck). What is NOT included is stain, paint, or finishing material such as sandpaper.
What To Expect To Assemble:
- Finish Sanding and painting of wood. Research how to stain/paint wood for detailed instructions.
- Finish sanding/filing plastic covers.
- All parts bolt/screw together except the electronics need to be soldered (set-necks need to be glued).
- After guitar is assembled you will have to know how (or have someone) to "set-up" the guitar. I.E. Action, truss-rod, intonation.
Dieser Artikel wird verkauft "wie beschrieben"
Dieser Artikel wird verkauft "wie beschrieben" und kann nicht retourniert werden, es sei denn er kommt anders als beschrieben oder fotografiert an. Artikel müssen im Originalzustand mit allen gelieferten Teilen und Zubehör in ursprünglicher Verpackung zurückgesendet werden.Mehr erfahren
| Zustand | Brandneu (Neu) Brandneue Artikel werden von autorisierten Händlern oder Herstellern verkauft und kommen in originaler Verpackung.Weitere Informationen |
|---|---|
| Marke |
|
| Modell |
|
| Farbe |
|
| Kategorien | |
| Jahr |
|
| Hergestellt in |
|
| Rechts-/Linkshändig |
|
| Anzahl der Saiten |
|
Möglicherweise sind hier Informationen zur Produktsicherheit verfügbar.
BBS Musical Products & Repairs
Escondido, CA, Vereinigte Staaten von Amerika
Mitglied bei Reverb seit:2020

