Reverb has your back if your item is lost, damaged, or doesn't match its description. Simply report any issues within 7 days and we'll help you get a full refund.Learn More
About This Listing
Inspired by the beautifully jagged, red-sand desert landscape of
Monument Valley, the Monument Tremolo is both a harmonic, and standard
tremolo that produces a rich, luscious, warm pulsating modulation
capable of peaks and valleys as smooth or as jagged as the real ones
that our dear mother nature created long ago.
With different
combinations of the rate, division and shape knobs and tap tempo,
everything from traditional tremolo to inspiring unique waveforms will
help you carve new paths that you won’t hear anywhere else.
Harken
back to vintage tones inspired by Fender Brownface amps in Harmonic
mode. A low-pass and high-pass version of your guitar signal are
modulated opposite of each other, or 180º out of phase (high and low
frequencies rise and fall opposite of each other). The result is a warm,
almost “chewy” tremolo.
The Division knob can be set to quarter, triplet, eighth and sixteenth.
Wave shapes can be controlled via the Shape knob. You can move between Sine, Square, Ramp, Lumps and Monument Mode (random).
A
special feature on the Monument is the bypass switch also has a
momentary function. When the switch is in off position, press and hold
to temporarily activate the effect to add a moment of texture. Releasing
the switch turns the effect off.
Setting the depth knob at 0 and the volume knob above unity creates a clean boost.
Exact size of the diecast enclosure is 4.67” x 3.68” x 1.547”.
Power requirements are 9VDC (250mA minimum)
The
use of an isolated power supply is recommended for powering all Walrus
Audio Pedals. Daisy chain power supplies are not recommended.
Built to emulate the wide expanses and jagged edges of Monument Valley, the Walrus Audio Monument is a two-in-one harmonic/standard tremolo that goes from vintage warble to modulated pinpoints with a few knob turns.
Interface: Rate, Depth, Division, Shape, Volume knobs with Harmonic/Standard switch
Inspired by the beautifully jagged, red-sand desert landscape of
Monument Valley, the Monument Tremolo is both a harmonic, and standard
tremolo that produces a rich, luscious, warm pulsating modulation
capable of peaks and valleys as smooth or as jagged as the real ones
that our dear mother nature created long ago.
With different
combinations of the rate, division and shape knobs and tap tempo,
everything from traditional tremolo to inspiring unique waveforms will
help you carve new paths that you won’t hear anywhere else.
Harken
back to vintage tones inspired by Fender Brownface amps in Harmonic
mode. A low-pass and high-pass version of your guitar signal are
modulated opposite of each other, or 180º out of phase (high and low
frequencies rise and fall opposite of each other). The result is a warm,
almost “chewy” tremolo.
The Division knob can be set to quarter, triplet, eighth and sixteenth.
Wave shapes can be controlled via the Shape knob. You can move between Sine, Square, Ramp, Lumps and Monument Mode (random).
A
special feature on the Monument is the bypass switch also has a
momentary function. When the switch is in off position, press and hold
to temporarily activate the effect to add a moment of texture. Releasing
the switch turns the effect off.
Setting the depth knob at 0 and the volume knob above unity creates a clean boost.
Exact size of the diecast enclosure is 4.67” x 3.68” x 1.547”.
Power requirements are 9VDC (250mA minimum)
The
use of an isolated power supply is recommended for powering all Walrus
Audio Pedals. Daisy chain power supplies are not recommended.
Built to emulate the wide expanses and jagged edges of Monument Valley, the Walrus Audio Monument is a two-in-one harmonic/standard tremolo that goes from vintage warble to modulated pinpoints with a few knob turns.
Interface: Rate, Depth, Division, Shape, Volume knobs with Harmonic/Standard switch