Upgrade wiring kit Pre-wired fits Fender Stratocaster Orange Drop cap CTS pots

BEFORE BIDDING make sure to READ all text below, look at all the pictures, and review shipping costs and return policy. Thank you!

"Vintage Relic pre-wired upgrade kit fits Fender Stratocaster. New. This is the best and most economical way to improve the tone of your Custom Shop USA or Mexican Strat!

• 3 CTS 250k split shaft pots (10% tolerance). We measure each pot and use ones with higher readings for the volume pot.
  
  
• 1 Fender 5-way control switch. Includes a white plastic switch tip.
  
  
• 1 Sprague Orange Drop .047 uF tone capacitor (715P). We add cloth shielding to the terminals to prevent a "ground out." These are GREAT sounding caps. TONE!!
  
  
• 1 Switchcraft JACK included.
  
  
• All cloth vintage style 22 ga push back wire.
  
  
• "Normal" Strat wiring (tone for neck and middle pickup only). If you want tone control for the bridge pickup, in addition to or instead of the middle pickup, we can wire it that way for you.
  
  
• Jack and Ground wires soldered to the volume pot.
  
  
• Wiring diagram included."
  
  Distance between the components (center to center); if you need different spacing, let us know:
  
  switch to volume = 2.0"volume to tone 1 = 1.75"
  tone 1 to tone 2 = 1.75"
  Above text and pictures copyright Vintage Relic. All rights reserved.
  
  
• Pot specs:
  Tolerance = +/- 10% 
  Can Size = 15/16 in. radius X 3/8 in. height
  Bushing Threads = 3/8-32 
  Bushing Height = 3/8 in. 
  Shaft Type - split 
  Shaft Diameter = .238 in (6.3mm) 
  Spline Count = 24 (NOT metric) 
  Shaft Length - 3/8 in. 
  Hole size requirement = 3/8 in. 
  Value = 250K Ohms