The Catapult TX4L and RX4L are four-channel line level splitters and
isolators that allow you to split four audio channels and transmit them
over a single standard cat5 shielded twisted pair cable. This allows you
to split line level signals between three different destinations,
either on stage or using a buildings existing Cat 5 or Cat 6 cabling to
route the signal. Each unit features line level isolation transformers
which help to eliminate buzz and hum caused by ground loops, saving
hours of troubleshooting. The TX4L has four XLR-F inputs and four
isolated XLR-M outputs, while the RX4L has four direct XLR-M outputs and
four isolated XLR-M outputs. Both units feature RJ45 type Ethercon
connections with ground lift switches.
Specifications:
Audio circuit type:
Passive line splitter, transformer based
Frequency response:
7Hz ~ 20KHz
Dynamic range:
140dB
Total harmonic distortion:
0.0007% @ 1kHz
Common Mode Rejection Ratio:
>113dB
Maximum Input:
+35dBu
Features
Ground lift
Input Connectors:
XLR, RJ45
Output Connectors:
XLR, RJ45
General
Construction:
14 gauge steel chassis & outer shell
Size (L x W x D):
L: 8 1/8 x W: 4 1/8 x H: 2
Weight:
2.6 LBS
Shipping size (L x W x D):
L: 11 x W: 5 x H: 2.75
Shipping weight:
2.9 LBS
Power:
Passive, no power required
Conditions:
For use in dry locations only between 5°C and 40°C
Warranty:
Manufacturer's 3 Year Warranty
The Catapult TX4L and RX4L are four-channel line level splitters and
isolators that allow you to split four audio channels and transmit them
over a single standard cat5 shielded twisted pair cable. This allows you
to split line level signals between three different destinations,
either on stage or using a buildings existing Cat 5 or Cat 6 cabling to
route the signal. Each unit features line level isolation transformers
which help to eliminate buzz and hum caused by ground loops, saving
hours of troubleshooting. The TX4L has four XLR-F inputs and four
isolated XLR-M outputs, while the RX4L has four direct XLR-M outputs and
four isolated XLR-M outputs. Both units feature RJ45 type Ethercon
connections with ground lift switches.
Specifications:
Audio circuit type:
Passive line splitter, transformer based
Frequency response:
7Hz ~ 20KHz
Dynamic range:
140dB
Total harmonic distortion:
0.0007% @ 1kHz
Common Mode Rejection Ratio:
>113dB
Maximum Input:
+35dBu
Features
Ground lift
Input Connectors:
XLR, RJ45
Output Connectors:
XLR, RJ45
General
Construction:
14 gauge steel chassis & outer shell
Size (L x W x D):
L: 8 1/8 x W: 4 1/8 x H: 2
Weight:
2.6 LBS
Shipping size (L x W x D):
L: 11 x W: 5 x H: 2.75
Shipping weight:
2.9 LBS
Power:
Passive, no power required
Conditions:
For use in dry locations only between 5°C and 40°C
Warranty:
Manufacturer's 3 Year Warranty