Corsynth - C102 VC LFO: Voltage Controlled Low Frequency Oscillator [5U/MU]

Manufacturer Description:

The C102 Voltage Controlled LFO is a voltage controlled low frequency oscillator with five waveforms available simultaneously.

With three frequency ranges ( L, M, H ) the VC LFO can oscillate from 7
minutes per cycle up to 800 Hz. Using the FM MOD input this range can be
extended from 12 minutes per cycle up to 1,3 KHz. With this wide
frequency range, the LFO can be used to produce really slow and subtle
modulations and audio frequency modulation (FM sounds).

Another important feature is that the oscillation frequency can be
voltage controlled using the FM input. You can modulate the frequency
with an envelope, other LFO , sequencer etc. Using the FM input, it’s
also possible to create new waveforms like hyperbolic sine wave,
hyperbolic cosine wave and more. Just connect one of the VC-LFO outputs
to its own FM input and turn up the FM level potentiometer.

Also the C102 Voltage Controlled LFO has a Sync / Reset input (not
available in L mode). Every time a trigger signal is detected, the LFO
will restart the waveform to the beginning of its cycle.

Main Characteristics

Three frequency ranges:

L : from 7 minutes to 1 Hz
M : from 0.1 Hz to 35 Hz
H : from 2.5 Hz to 800 Hz

Five waveforms available simultaneously:

Sine

Triangle

Saw

Inverse Saw

Pulse ( with variable pulse width)

Sync/Reset input

Frequency Modulation input with attenuator

Pulse Width control

The C102 Voltage Controlled LFO is built using high quality electronic
components, Switchcraft jacks, NKK switches, Cosmo knobs (the same used
by Moog Modular) , black anodized aluminium front panel ( like the
original Moog Modulars ).

Technical Data:

Module Format : 5U, MU format ( Synthesizers.com, Moog )

Module Width : 1 MU ( Moog Unit )

Power : +15V@33,1mA ( with LED On ), -15V@23,9mA ( with LED On )

Power connectors : Synthesizers.com , MOTM ( 4 pin )

Frequency Range :7 minutes – 800 Hz

Signal Levels : 10 Vpp ( -5V to +5V )