Klipsch RSW-12 Subwoofer Top Line, 2400 Watts, 2 12" Drivers, 36DB Crossover, Deep, Extended, Powerful, Ex Sound Black

Top of the line Klipsch RSW-12 Powered Subwoofer, very powerful, very deep, very extended, very musical, impressive. See impressive description and specifications below. It is in nice well cared for working condition, always in a non smoking climate controlled environment. The only cosmetic issue is the grill has 2 clips on the top that are broken. They are plastic and there is probably a way to attached the grill, the bottom 2 clips do hold the grill on to the subwoofer. It is very heavy and has 1 heavy duty 12" active front firing woofer and heavy duty 12" rear firing passive woofer, BASH powerful 2400 watt amplifier with very steep and effective 36DB per octave crossover for seamless integration into your quality Hifi system or Home Theater system. It sounds superb, open, dynamic, deep, extended, fast, musical and very powerful. It is very heavy. It is factory wired inside with heavy duty monster cable wiring. Has the IEC AC cable included. The shipping cost includes safe packing, insurance, prompt shipping and tracking number. It is very heavy and it will be packed safely. Buy with confidence, see my feedback. Good listening, SonnY :)

The RSW-12 powered subwoofer extends and intensifies low-frequency output in any audio system. Whether providing all the bass for a system built around small satellites or filling in and reinforcing the bottom end for full-range speakers, it dramatically enhances sonic impact and emotional intensity. The RSW-12 has a rear-firing active driver and a front-mounted passive radiator, both with 12-inch Cerametallic™ cones and rigid, low-resonance cast-aluminum frames. The active driver’s large magnet structure and high-temperature voice coil enable it to deliver rich, clean, thunderous bass down to the bottom of the audible frequency range without sacrificing clarity and detail. It is powered by a high-efficiency BASH® digital hybrid amplifier, capable of 2400 watts dynamic power output. The passive radiator enables the RSW-12 to generate high levels of very deep bass from a sensibly sized enclosure. To ensure seamless blending with a system’s main speakers, the RSW-12 incorporates an exceptionally steep 36dB/octave low-pass electronic crossover with a continuously variable frequency control and a phase switch. A bypass switch allows direct connection to the subwoofer amplifier for use with the crossover built into an A/V preamp or receiver. The RSW-12’s level control is mounted on the side of the cabinet for easy access. Input is line-level via a stereo pair of RCA jacks; another pair of RCA jacks provides unfiltered output for connection to a second subwoofer or other component. An “auto power” feature enables the subwoofer to turn on and off automatically.

 Cerametallic cone driver and passive radiator, cast-aluminum frames

■ High-efficiency BASH digital hybrid amplifier with very high power output

■ Steep-slope 36dB/octave crossover filter with bypass option

■ Side-mounted level control for easy adjustment

■ Auto power feature turns sub on and off automatically

ENCLOSURE TYPE

12'' Bass-reflex via 12'' passive radiator

AMPLIFIER BASH digital hybrid FTC Rated

Power: 625 watts continuous @ <1%THD Dynamic Power: 2400 watts @ <1%THD

AUTO POWER 2 second ON delay, 15 minute OFF delay

BANDWIDTH 22-120Hz ± 3dB

MAXIMUM OUTPUT 119dB @ 30Hz 1/8 space, 1 meter

LOW PASS Continuously variable from 40-120Hz

CROSSOVER 36dB/octave slope above 120Hz

INPUTS Two line level RCA phono jacks, low pass enable/disable switch for LFE mode

OUTPUTS Two line level RCA phono jacks (unfiltered)

PHASE Switchable 0-180 degrees

DRIVE COMPONENTS One 12'' (30.5cm) Cerametallic cone woofer and one 12'' (30.5cm) Cerametallic cone passive radiator

NET WEIGHT 58 lbs. (26.3kg)

HEIGHT 16.2" (41.1cm)

WIDTH 15.6" (39.6cm)

DEPTH 22.8" (57.9cm) w/grille, 21.5'' w/o grille

FINISH Black Ash woodgrain vinyl

VOLTAGE 110/120 VAC 60Hz