Custom prewired pickguard ready to be installed in a custom stratocaster. Wooden pickguard knobs and pickup covers. Covers were changed between pickups a few times and that's why they cracked but they are glued in so will not move. Lollar Blackface in the neck position. Suhr ML in the middle. Lollar Special and Tweed in the bridge (Push pull knob on the bridge tone switches between the two pups wired as a humbucker in series and Blackface as single so you get a true single coil when "split"). The Bridge single coil has a Callaham baseplate for improved punch and bass response. Paper in oil tin foil 0.001 uF tone cap - very low value for a musical warmth tone control, usable across the range and never gets muddy. Suhr/Ilitch Silent Single Coil system - takes away the single coil hum so that all positions are hum canceling without affecting the tone. That's what the backplate is for - look up installation instructions with Ilitch Electronics - super simple: just solder the two wires coming from the backplate to the pickguard. The wood is brittle so it cracked in a few places but doesn't affect the stability. You can glue it with wood glue if you want. You will need you own pickguard screws but comes with backplate screws. Let me know if you have any questions!