Empress Effects Echosystem is one of the most advanced delaypedaaleista. Twelve päädelaytyyppiä, each with multiple variations, with the end result for a total of 36 kinds of delayalgoritmia. You can use two types of delay simultaneously, which gives you a soaring number of different soundikombinaatioita.
by

• by
• Settings: by log Delay Selects the current sound. You can choose the following sounds, which also has a number of options within the sound: 1 by. Digital Delay by two. Tape Delay by 3. Analog Delay by 4. MultiDelay (multitap, set the tapped tempo switch rhythmic pattern) by five. Mod Delay by 6. Filter Delay by 7. Ambient Delay by 8. Delay + Reverb by 9. Reverse by 10. Stutter by 11. Lo-Fi Delay by 12. Whiskey (pedaling the strangest of sounds that do not fit into any category) by Delay Time / Ratio:. for delay Specifies the length, in most of the modes length is between 20 ms -1.2 s You can also set for delay. the length of the tap tempo switch. Tap Tempo when using this setting determines the tempo of the division. by Mix Specifies the relationship between the dry and effected signal. At 7 to 100% of the dry air sound to the delay from 5 to 100% wet sound (within the reproduction-only). by Output: Sets the output volume level. Unity gain at 12 ° C by the Feedback:. Specifies the number of repetitions. by Tone: to adjust the playback sound color. Neutral at 12 ° C. by Thing 1 and Thing 2: These settings are controlled by different properties in different modes. These can be, for example. Modulation speed and depth, saturation, panning, filter and reverb controls. by Scroll switch: Scroll through the memory locations of this switch. Activation of the memory slot, press the tap-switch by Engines button. Determine whether you have one or two delay sounds simultaneously. You can also configure a dual-mode delay of the routing exchange with the following terms and conditions: Dual Parallel, Serial and Dual Left / Right free
• Power consumption: 2.1 mm 9V DC power supply minus the middle. 300 mA. free
• 35 memory slots free
• Built-in cabinet simulator free
• The latest firmware pedal functions have been added looper (please refer to the introduction of the looper < strong> ) free
• Stereo inputs and outputs free
• MIDI-controllable free
• CV-controllable free
• Ekspressiopedaalin interface free
• Output 2 isolated from the output 1 using an isolation transformer, not picking up hum caused by a ground loop when playing with two amplifiers. free
• True Bypass or Buffered Bypass (user selectable). free
• 100% analog signal path dry free
• Firmware upgradeable via SD card interface. free
• Done in Canada free | royalty by