G-Storm Electro KVP Pitch CV + Gate Voltage Processor for MS-20

So you want to control your vintage MS-20 / MS-20 Mini / Behringer K-2 from Euro modules. But when you do, it sounds weird – the pitch is wayyy not right. And the gate triggers… forget-about-it. KVP can help with that.

KVP can take Euro pitch voltages (v/oct), and process them to standards used by Korg and any other manufacturer that uses the Hz/v standard. It can also do the other way around so you can control your v/oct synths and Euro modules pitch from the MS-20. Dialing in the frequency and tracking width is a breeze using multi-turn trim pots accessible from the front panel. KVP will generate about 3octaves of tracking (C1 to C4) - same as the MS-20 keybed.

KVP also has 2processors for handling gate signals as well. Slide the type switch to the right (convert) and it can convert Korg to Euro gates or the other way around. Slide the type switch to the left (no conversion) and the same gate that goes in is what comes out. Every KVP is meticulously hand-crafted in limited quantities, not mass-produced.

Please NOTE: KVP is an all analog vintage circuit design. And as such, along with the synth, will require 5-10 minutes of warm up time to stabilize before performing tuning calibrations.

Be sure to check out my other cool modules available in my Reverb store.

INCLUDED | 16-pin-to-10-pin power connector cable.

NOT INCLUDED | M2.5 or M3 (Doepfer standard) Phillips-head basic zinc rack screws are only provided on special request. Why do I do this? To cut down on rack screws that are wasted in the universe. What's it gotta be? Thousands? Hundreds of thousands? Unused, unwanted. You know the ones I mean | wrong size, wrong color, cheap junk tin, top slot-stripping, rack-rashers, wrong thread count, wrong length, wrong political party, etc. I use thumb screws in 2 sizes myself. So yeah, if you request some M3's from me, I will probably pull the ones from other companies boxes in my closet. You're welcome :D

Specifications:
Power: 10-pin Eurorack standard shrouded header

Inputs – 4
Outputs - 4
Current - 23mA +12V, 21mA -12V, +5V (not used)
Depth - 25mm