Entrospec Iungo
Iungo is a terrific means of melding the functionality of MIDI controlled instruments with the voltage control afforded by modular synthesizers. With Iungo, users can build both monophonic and polyphonic sequences with their modular synthesizer and use them to control MIDI gear. As one would expect, this gallantly kicks open the door to an array of previously unexplored options.
Iungo Features
- Stored MIDI data accessed via cv and gate inputs
- Banks will store up to 16 notes and rests. Each note can have an independent MIDI channel
- Each bank can also store 1 program change message
- 5 memory locations to store patches. Each patch saves the data in all 5 banks plus the mode settings
- “Chord” mode outputs all notes in a bank simultaneously when triggered
- “Seq” mode outputs each note in a bank consecutively upon receiving a gate signal
- “Poly Seq” mode runs all 5 banks in sequencer mode simultaneously
- The length of each bank is independent, allowing for more complex sequences to be produced
- Chords and sequences can be transposed via the MIDI input
- Velocity of MIDI data is determined by the amplitude of the gate signal
- “MIDI Clock” mode outputs a MIDI clock byte whenever the gate input goes high
- The first clock pulse will also send a MIDI start message, MIDI stop is sent if there is no gate received for 1 second
- The MIDI clock pulses can be shifted forwards or back by 1/8ths, 1/16ths or individual clock pulses
- MIDI input and output via 2.5mm stereo jack to 5 pin DIN cables. The same format adopted by iOS devices
