SETbucker Set and Solderless Prewired Kit for Les Paul

Special offer: We would like to see how you play with our products in YouTube. Post your video and message us with the link and we will refund 30% of your purchase. We will also add your video to our YouTube channel library to honor your work!

SETbucker set + Solder-less Prewired Kit for Les Paul

The SETbucker offers more versatile tonal options at the expense of more complex wiring. This prewired kit eliminates such a complexity and even soldering for installation!

Included:
- SETbucker set of your choice: read "Recommended pickup pairs" below
- 2-volume and 2-tone: see below for push/pull pot selections
- 4 barrel knobs with color of your choice (gold, orange or black) that matches the pot bushing spline.   
- 0.022 µF Orange Drop capacitors
- 2 snap-in terminals for SETbucker and signal wires
- 3-port ground wire splicer
- Pickup cover: no additional cost for open pickups. Message us if the pickups need covered (additional $20 for nickel and $40 for gold).
- Pickup selection switch, input jack and connecting wires for them are NOT included. Please contact us if you need them for an extra charge (+$30). Note that a wire from the selection switch to the input jack MUST be soldered at installation (no more solderless).

Push/pull pot selections:
- Alpha with 3/8" bushing diameter/length, 24-spline: for US-made LP holes and knobs, defaults selection, if no specific request at order
- Bourne with 3/8" bushing diameter/length, 18-spline: for US-made LP holes and import knobs
- Some Epiphone and import LPs have 8 mm pot holes. We recommend to use 3/8" pots by slightly expanding the holes but let us know if you want to use 8 mm push/pull pots (18 spline) and we can support.

Recommended pickup pairs:

C-2N/C-2B: AlNiCo2 pickups for balanced vintage tone. SE/SET modes are gritty and aggressive, though the HB sound is round and smooth.

C-5N/C-5B: for vintage clear tone seekers. They are with AlNico5 magnets and PE wires. 

M-2N/M-3B: CJ's favorite pick for any type of guitars. It gives both crystal clarity on the neck position and solid power on the bridge position while keeping vintage vibe.

M-2N/I-2: similar to popular SD Hot Rodded Humbucker set (SH-2/SH-4) because I-2 is a replica of SH-4 (plus inner-coil). SE and SET modes are an added benefit of using SETbucker. I-2 is $10 more expensive but we offer no extra charge.

For more info and sound clips from pickups, check cjlabpickups.com/products and cjlabpickups.com/setbucker, respectively. If you know what you want, just mix and match from the list of SETbucker models and let us know!

For more info, check: 
- Homepage: cjlabpickups.com
- Product page: cjlabpickups.com/products
- YT channel: youtube.com/channel/UCvRprbN9FUIgpYb2R-xN9Zw