The Audix SCX25A-MP Microphones (Matched Pair) are manufactured with a precision machined brass body, innovative capsule suspension system, steel mesh grill, black multi-layer class ‘A’ liquid finish and gold plated XLR connector. Uniquely shock-mounted within an intricate machined brass ring, the capsule is completely isolated from the mic body and electronics. By successfully minimizing acoustic reflections and diffractions, the Audix SCX25A-MP delivers a pure, open air sound with exceptional detail and realism.

The Audix SCX25A-MP is consistent when responding to on and off-axis signals. This matched pair exhibits outstanding phase coherence and minimal proximity effect. With a wide cardioid polar pattern, the Audix SCX25-MP enables the sound engineer to blend the sound of the instrument or vocal with the sound of the room. The Audix SCX25-MP large diaphragm microphone will handle SPLs in excess of 135 dB and provides up to 20 dB of ambient noise rejection.

Affectionately referred to as "The Lollipop," The Audix SCX25A-MP is perfectly suited to capture the sound of acoustic instruments such as pianos, guitars, vibes, woodwinds, brass, percussion toys, drums, orchestra and symphony sections.

• Piano
• Acoustic instruments
• Drum overheads
• Ambient room mic
• Studio, lead, and backing vocals
• Voice over
• Choir
• Orchestra

• Premium large diaphragm studio microphone for studio or live sound
• Delivers pure open air sound
• Shock mounted capsule suspension system
• Designed, machined, assembled and tested in the USA

• Transducer Type: Condenser
• Frequency Response: 20 Hz - 20 kHz
• Polar Pattern: Cardioid
• Output Impedance: 200 Ohms
• Sensitivity: 28 mV / Pa @ 1k
• Equivalent Noise Level: 14 dB (A-Weighted)
• Signal to Noise Ratio: 80 dB
• Maximum SPL: =135 dB
• Dynamic Range: 121 dB
• Power Requirements: 48-52 V Phantom
• Connector: 3-Pin XLRm
• Polarity: Positive Pressure on Diaphragm Produces Positive Voltage on Pin 2 Relative to Pin 3 of Output XLR Connector
• Materials / Finish: Machined Brass / Black Finish
• Weight (Per Mic): 244 g / 8.6 oz
• Length (Per Mic): 148 mm / 5.8 in

• 2 x Audix SCX25A-MP Microphones (Matched Pair)
• 2 x Metal Adapter to Accommodate 3/8” Mic Stands
• 1 x Foam Lined Wooden Case
• 2 x DClip - Heavy-Duty Nylon Molded Snap on Clip
• Manufacturer Warranty