The Audix DP5-A Drum Microphone Kit is the easy turnkey solution for musicians, music venues, recording studios, churches, and more to get premium quality drum sounds without resorting to using equalizers or other processing. Easy to set up and position, the Audix DP5-A offers the professional set of 5 drum microphones for stage or studio applications.

The package includes the , Audix's flagship kick drum mic, two- 's for rack toms, one for floor tom, and the for snare. Also included are four Audix DVICE rim mount clips for every mic except the D6 kick drum mic, which comes with a heavy duty tension fit mic clip. Everything is conveniently packaged in a foam-lined aluminum carrying case for safe keeping when the mics are not in use.

The Audix D6 dynamic instrument microphone is used for stage, studio and broadcast applications. Designed with a cardioid pickup pattern for isolation and feedback control, the Audix D6 drum microphone is equipped with a VLM™ diaphragm for natural, accurate sound reproduction. Lightweight, compact and easy to position, the Audix D6 cardioid microphone is an excellent choice for miking instruments requiring extended low frequency reproduction such as kick drums, large toms and bass cabinets. The Audix D6's transformer less design, low impedance and balanced output allow for interference-free performance.

The Audix D2 dynamic instrument microphone is used for stage, studio and broadcast applications. It is designed with a hypercardioid pickup pattern for isolation and feedback control and is equipped with a VLM™ diaphragm for natural, accurate sound reproduction. The Audix D2 is an excellent choice for miking instruments with a percussive nature such as rack toms, congas, saxophones, guitar cabinets and brass. Transformer less design, low impedance and balanced output insure that the Audix D2 hypercardioid instrument microphone will perform interference-free.

With a wide frequency response of 40 Hz - 18 kHz and the ability to handle SPLs in excess of 144 dB, the Audix D4 dynamic instrument microphone is an excellent choice for miking instruments requiring precise, low frequency reproduction such as large rack toms, floor toms, cajon, djembe, tympani, leslie bottom, bass flute, saxophone and baritone saxophone, trombone, acoustic bass, bass cabinets and small kick drums. The Audix D4 is lightweight, compact and easy to position. Used for stage, studio and broadcast applications, the Audix D4 dynamic instrument microphone is designed with a hypercardioid pickup pattern for isolation and feedback control. The Audix D4 hypercardioid is also equipped with a VLM™ diaphragm for natural accurate sound reproduction.

Designed with a cardioid pickup pattern for isolation and feedback control, the Audix i5 all-purpose dynamic instrument microphone is equipped with a VLM™ diaphragm for natural, accurate sound reproduction. The Audix i5 is used for stage, studio and broadcast applications and is able to handle SPLs in excess of 140 dB without distortion. The Audix i5 cardioid microphone can be used to microphone a wide variety of musical instruments, guitars and bass cabinets as well as vocals and speech. The Audix i5 instrument microphone is sturdy, compact and easy to position. With a wide frequency response of 50 Hz - 16 kHz, the Audix i5 provides clear sound reproduction without having to rely on EQ.

• • Professional dynamic instrument microphone for live sound or studio
  • Ground-shaking low end with excellent definition and clarity
  • VLM Capsule
  • Designed, machined, assembled & tested in the USA
• • Professional dynamic instrument mic for live sound or studio
  • Full response with punchy mid-bass
  • VLM Capsule
  • Designed, assembled & tested in the USA
• • Professional dynamic instrument microphone for live sound or studio
  • Wide spectrum frequency response with extended bass response
  • VLM Capsule
  • Designed, assembled, manufactured & tested in the USA
• • All-purpose professional dynamic instrument mic for live sound or studio
  • Clear, accurate sound with wide frequency response
  • VLM Capsule for natural, accurate sound reproduction
  • Designed, assembled & tested in the USA

• :
  • Transducer Type: Dynamic
  • Frequency Response: 30 Hz - 15 kHz
  • Polar Pattern: Cardioid
  • Output Impedance: 280 Ohms
  • Sensitivity: 0.8 mV / Pa @ 1k
  • Capsule Technology: WLM Type E
  • Off Axis Rejection: >20 dB
  • Maximum SPL: =144 dB
  • Power Requirements: None
  • Connector: 3-Pin XLRm
  • Polarity: Positive Pressure on Diaphragm Produces Positive Voltage on Pin 2 Relative to Pin 3 of Output XLR Connector
  • Materials / Finish: Machined Aluminum / Black Finish
  • Weight: 254 g / 8.9oz
  • Length: 117 mm / 4.6 in
• :
  • Transducer Type: Dynamic
  • Frequency Response: 68 Hz - 18 kHz
  • Polar Pattern: Hypercardioid
  • Output Impedance: 280 Ohms
  • Sensitivity: 1.2 mV / Pa @ 1k
  • Capsule Technology: VLM Type B
  • Off-Axis Rejection: >30 dB
  • Maximum SPL: =144 dB
  • Power Requirements: None
  • Connector: 3-Pin XLRm
  • Polarity: Positive Pressure on Diaphragm Produces Positive Voltage on Pin 2 Relative to Pin 3 of Output XLR Connector
  • Materials / Finish: Black Hard Coat
  • Weight: 128 g / 4.5 oz
  • Length: 100 mm / 3.9 in
• :
  • Transducer Type: Dynamic
  • Frequency Response: 40 Hz - 18 kHz
  • Polar Pattern: Hypercardioid
  • Output Impedance: 280 Ohms
  • Sensitivity: 1.4 mV / Pa @ 1k
  • Capsule Technology: VLM Type D
  • Off Axis Rejection: >20 dB
  • Maximum SPL: =144 dB
  • Power Requirements: None
  • Connector: 3-Pin XLRm
  • Polarity: Positive Pressure on Diaphragm Produces Positive Voltage on Pin 2 Relative to Pin 3 of Output XLR Connector
  • Materials / Finish: Black Hard Coat
  • Weight: 128 g / 4.5 oz
  • Length: 100 mm / 3.9 in
• :
  • Transducer Type: Dynamic
  • Frequency Response: 50 Hz - 16 kHz
  • Polar Pattern: Cardioid
  • Output Impedance: 150 Ohms
  • Sensitivity: 1.5 mV / Pa @ 1k
  • Capsule Technology: VLM Type B
  • Off Axis Rejection: > 23 dB
  • Maximum SPL: = 140 dB
  • Power Requirements: None
  • Connector: Switchcraft Male XLR Connector
  • Polarity: Positive Voltage on Pin 2 Relative to Pin 3 of Output XLR Connector
  • Housing / Finish: Die Cast Zinc Alloy / Black E-Coat
  • Weight: 183 g / 6.5 ounces
  • Length: 141.5 mm / 5.6 inches

• 1 x
• 1 x
• 2 x s
• 1 x
• 4 x s
• 1 x Audix DCLIP Microphone Clip
• 1 x Aluminum Road Case
• Manufacturer Warranty